{"title":"LUMINOR 5.1 (LB5-101B)","description":"\u003cp\u003eReplacement UV lamps, quartz sleeves, O-rings and manuals for the Luminor Blackcomb 5.1 LB5-101B, an NSF\/ANSI 55 Class B UV system rated at 13 GPM (3\/4-inch MNPT). The LB5-101B uses the RL-820 lamp and RQ-820 quartz sleeve.\u003c\/p\u003e","products":[{"product_id":"luminor-rl-820-replacement-uv-lamp","title":"Luminor RL-820 Replacement UV Lamp for LB4-101, LB5-101, LB6-101","description":"\u003cp dir=\"ltr\"\u003eThe RL-820 is a genuine Luminor replacement UV lamp and lamp key for LUMINOR BLACKCOMB \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-4-1-lb4-101-ultraviolet-system-11-gpm\"\u003eLB4-101\u003c\/a\u003e, \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-5-1-lb5-101-uv-system-11-gpm\"\u003eLB5-101\u003c\/a\u003e, and \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-6-1-lb6-101-uv-system-with-sensor-10-gpm-3-4-mnpt\"\u003eLB6-101\u003c\/a\u003e UV water treatment systems, and their NSF Class A\/B variants listed below. It is an authentic Luminor part, not a compatible aftermarket substitute, so it drops in and treats water the way your system was originally tested and certified to perform.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe lamp is rated for 9,000 hours of use, about 12 months of continuous operation. UV-C output weakens gradually over the lamp's life, so Luminor recommends replacing it every 12 months or after 9,000 hours, whichever comes first, to keep UV output where the system needs it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor lamp matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLuminor tests and certifies its UV systems as a complete unit: lamp, chamber, and sleeve together. An authentic RL-820 keeps your system performing the way it was certified. A non-Luminor lamp voids the system's NSF\/ANSI 55 certification and can affect your warranty coverage if a problem comes up later.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-4-1-lb4-101-ultraviolet-system-11-gpm\"\u003eLB4-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-5-1-lb5-101-uv-system-11-gpm\"\u003eLB5-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-6-1-lb6-101-uv-system-with-sensor-10-gpm-3-4-mnpt\"\u003eLB6-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eLB5-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101A (NSF Class A, monitored, includes UV sensor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe A and B suffixes mark the system's NSF\/ANSI 55 monitoring class (A is monitored with a UV sensor, B is non-monitored), not a different lamp. All six models above share the same \"-101\" flow rating and use the RL-820.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e The RL-820 is the lamp only. For the full replacement:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rq-820-uv-quartz-sleeve-for-lb4-101-lb5-101-lb6-101\"\u003eLuminor RQ-820 UV Quartz Sleeve\u003c\/a\u003e, the quartz sleeve that houses the lamp. Replace every 24 months, or sooner if it's visibly scaled, cloudy, or damaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rlq-820-uv-lamp-and-sleeve-replacement-kit\"\u003eLuminor RLQ-820 UV Lamp and Sleeve Kit\u003c\/a\u003e, which bundles the RL-820 lamp, RQ-820 sleeve, and lamp key together for LB4-101, LB5-101, and LB6-101.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672163319989,"sku":"RL-820","price":111.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/Luminor_RL-820_UV_Replacement_Lamp.jpg?v=1788814561"},{"product_id":"luminor-rq-820-uv-quartz-sleeve-for-lb4-101-lb5-101-lb6-101","title":"Luminor RQ-820 UV Quartz Sleeve for LB4-101, LB5-101, LB6-101","description":"\u003cp dir=\"ltr\"\u003eThe RQ-820 is a genuine Luminor replacement quartz sleeve for LUMINOR BLACKCOMB LB4-101, LB5-101, and LB6-101 UV systems, plus their NSF Class A\/B variants below. It's an authentic Luminor part, not an aftermarket substitute, so your system keeps performing the way it was tested and certified.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-4-1-lb4-101-ultraviolet-system-11-gpm\"\u003eLB4-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-5-1-lb5-101-uv-system-11-gpm\"\u003eLB5-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-6-1-lb6-101-uv-system-with-sensor-10-gpm-3-4-mnpt\"\u003eLB6-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eLB5-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101A (NSF Class A, monitored, includes UV sensor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe A and B suffixes mark the system's NSF\/ANSI 55 monitoring class (A is monitored with a UV sensor, B is non-monitored), not a different sleeve. All six models above use the identical RQ-820.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor sleeve matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLuminor certifies its UV systems as a complete lamp, chamber, and sleeve unit. A non-Luminor sleeve can differ in wall thickness or quartz quality, reducing UV-C output reaching the water and affecting your warranty coverage.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rl-820-replacement-uv-lamp-for-lb4-101-lb5-101-lb6-101\"\u003eLuminor RL-820 UV Replacement Lamp\u003c\/a\u003e, the lamp that goes inside this sleeve. Replace every 12 months, or after 9,000 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rlq-820-uv-lamp-and-sleeve-replacement-kit\"\u003eLuminor RLQ-820 UV Lamp and Sleeve Kit\u003c\/a\u003e, which bundles the RL-820 lamp and RQ-820 sleeve together for LB4-101, LB5-101, and LB6-101.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672164303029,"sku":"RQ-820","price":68.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-rq-820-replacement-quartz-sleeve-rq-820__24967.1691448712.1280.1280.jpg?v=1788837783"},{"product_id":"luminor-rlq-820-uv-lamp-and-sleeve-replacement-kit","title":"Luminor RLQ-820 UV Lamp and Sleeve for LB4-101, LB5-101, LB6-101","description":"\u003cp dir=\"ltr\"\u003eThe Luminor RLQ-820 UV Lamp and Sleeve Kit pairs a genuine \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rl-820-replacement-uv-lamp\"\u003eRL-820 UV lamp\u003c\/a\u003e with its matched \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rq-820-uv-quartz-sleeve-for-lb4-101-lb5-101-lb6-101\"\u003eRQ-820 quartz sleeve\u003c\/a\u003e and an installation key.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe RL-820 lamp is rated for 9,000 hours of service (about 12 months of continuous operation), and Luminor recommends replacing the quartz sleeve every 24 months. Replacing both together keeps UV output consistent and takes the guesswork out of maintenance timing. For step-by-step instructions, see our guides on \u003ca href=\"https:\/\/espwaterproducts.com\/pages\/how-to-replace-a-uv-lamp\"\u003ehow to replace a UV lamp\u003c\/a\u003e and \u003ca href=\"https:\/\/espwaterproducts.com\/pages\/how-to-clean-a-uv-sleeve\"\u003ehow to clean a UV sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor lamp and sleeve kit matters\u003c\/strong\u003e\u003cbr\u003eLuminor's UV water treatment systems are tested and certified as a complete unit — lamp, chamber, and sleeve together. Genuine Luminor parts keep your system performing the way it was certified; a non-Luminor lamp or sleeve can void that certification and affect your warranty coverage if an issue comes up later.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLB4-101\u003c\/li\u003e\n\u003cli\u003eLB5-101\u003c\/li\u003e\n\u003cli\u003eLB6-101\u003c\/li\u003e\n\u003cli\u003eLB5-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLB6-101A (NSF Class A, monitored, includes UV sensor)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672164729013,"sku":"RLQ-820","price":156.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-luminor-rlq-820-uv-lamp-and-sleeve-replacement-kit-with-key-for-lb4-101-lb5-101-and-lb6-101-uv-systems-rlq-820__28663.1691448490.1280.1280.jpg?v=1773762328"},{"product_id":"luminor-mod-app-uv-concierge-system-monitoring-application","title":"Luminor MOD-APP UV Concierge System Monitoring Application","description":"\u003cp\u003eThe LUMINOR UV Concierge Module is an information monitoring application that allows you to check the status of a single or multiple UV systems.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672165449909,"sku":"MOD-APP","price":160.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-luminor-uv-concierge-module-mod-app-mod-app__47746.1691450354.1280.1280.jpg?v=1773762285"},{"product_id":"luminor-lfm-0-75-uv-ultrasonic-flow-meter-3-4-mntp","title":"Luminor LFM-0.75 UV Ultrasonic Flow Meter 3\/4\" MNTP","description":"\u003cp\u003eThe LUMINOR LFM-0.75 Ultrasonic Flow Meter offers accurate, real-time flow monitoring that includes failsafe operation. At moments where the system senses little to no flow, a signal is sent to the controller to automatically reduce the power output of the UV Lamp thereby lessening power consumption resulting in energy savings, reduced quartz sleeve fouling and cooler operating temperatures.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672165482677,"sku":"LFM-0.75","price":320.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-luminor-lfm-0.75-ultrasonic-flow-meter-34-mntp-lfm-0.75__51971.1691447912.1280.1280.jpg?v=1719459100"},{"product_id":"luminor-rs-b2-5-uv-sensor-for-2-5-chamber-uv-systems","title":"Luminor RS-B2.5 UV Sensor for 2.5\" Chamber UV Systems","description":"\u003cp\u003eThe LUMINOR RS-B2.5 UV sensor monitors the UV wavelength or intensity that can be measured and displayed via the controller. This UV Sensor is mounted in the sensor port on 2 1\/2\" diameter UV chambers that include this sensor connection, such as the BLACKCOMB 5.1\/6.1 LB5\/6-021, LB5\/6-031, LB5\/6-061, LB5\/6-101, LB5\/6-151, all variants \u0026amp; NSF Class B ultraviolet water disinfection systems.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672169414837,"sku":"RS-B2.5","price":465.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-luminor-rs-b2.5-uv-sensor-module-rs-b2.5__65970.1691450131.1280.1280.jpg?v=1773762284"},{"product_id":"luminor-310039-quartz-sleeve-spring-for-luminor-systems","title":"Luminor 310039 Quartz Sleeve Spring for LUMINOR systems","description":"\u003cp\u003e\u003cspan\u003eThis spring is used on all Chandler Systems ultraviolet disinfection systems.  Also compatible with Luminor Blackcomb UV systems.  The spring goes inside the quartz sleeve before installing the lamp.\u003c\/span\u003e\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672195858613,"sku":"310039","price":8.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-310039-quartz-sleeve-spring-for-luminor-systems-310039__03859.1691447488.1280.1280.jpg?v=1773762122"},{"product_id":"luminor-320006-gland-nut-for-all-luminor-blackcomb-uv-systems","title":"Luminor 320006 Gland Nut for All Luminor Blackcomb UV Systems","description":"\u003cp\u003eReplacement LUMINOR Gland Nut for all Luminor Blackcomb LB4, LB5, LB6, LBH5, LBH6 series.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672200183989,"sku":"320006","price":13.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/320006__93037.1691419906.1280.1280.png?v=1773762120"},{"product_id":"luminor-300070-o-ring-for-nsf-validated-uv-systems","title":"Luminor 300070 Replacement O-Ring for NSF-Validated UV Systems","description":"\u003cp dir=\"ltr\"\u003eThe 300070 is a genuine Luminor replacement O-ring for Luminor NSF-validated UV water treatment systems. Luminor's parts list describes it as the NSF O-ring package, size #2-212. NSF-validated Luminor models carry an A or B suffix in the model number, and their chambers use this O-ring in place of the standard BLACKCOMB gland-nut O-ring (300038).\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUsed on Luminor NSF-validated systems, including\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLBH6-251A and LBH6-401A BLACKCOMB-HO 6.1 (NSF\/ANSI 55 Class A)\u003c\/li\u003e\n\u003cli\u003eOther LBH6 Class A models (LBH6-051A, -101A, -151A)\u003c\/li\u003e\n\u003cli\u003eLB5-101B and LB5-151B BLACKCOMB 5.1 (NSF\/ANSI 55 Class B)\u003c\/li\u003e\n\u003cli\u003eOther Class B models (LB5\/LB6-021B, -031B, -061B, -101B, -151B)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy use the genuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eNSF\/ANSI 55 certification covers the system as Luminor built it. Replacing seals with the specified Luminor part keeps the chamber sealed to specification. Inspect the O-ring whenever the chamber is opened for sleeve service (Luminor recommends cleaning the sleeve every 6-12 months) and replace it if it is flattened, cracked or leaking.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: 300070\u003c\/li\u003e\n\u003cli\u003eType: O-ring package for NSF-validated Luminor systems\u003c\/li\u003e\n\u003cli\u003eSize: #2-212\u003c\/li\u003e\n\u003cli\u003eUPC: 880027025640\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eConfirm part 300070 in your system manual before ordering. Standard (non-NSF) BLACKCOMB gland nuts use O-ring 300038, and the UV sensor port uses O-ring 310120.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304818860213,"sku":"300070","price":10.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-300070-2000x2000-source-update-ai-review.webp?v=1789617076"},{"product_id":"luminor-300016-uv-sensor-port-plug-kit","title":"Luminor 300016 UV Sensor Port Plug Kit with O-Ring and Nut","description":"\u003cp dir=\"ltr\"\u003eThe 300016 is a genuine Luminor sensor-port plug kit. It seals the UV sensor port on a Luminor UV chamber when no UV intensity sensor is installed, for example on BLACKCOMB 5.1 chambers that are ready for an optional sensor upgrade, or whenever a sensor is removed from service. The kit contains the three parts of the plug assembly so the port can be resealed after service.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKit includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTeflon sensor-port plug (Luminor part 310026)\u003c\/li\u003e\n\u003cli\u003eO-ring (Luminor part 310120)\u003c\/li\u003e\n\u003cli\u003eRetaining nut (Luminor part 390007)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eUse the 300016 to replace a worn or damaged plug assembly, to reseal the port after removing a UV sensor, or to replace the O-ring and nut when the port weeps water. If you are adding a UV sensor to a BLACKCOMB 5.1 system instead, the sensor replaces this plug.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: 300016\u003c\/li\u003e\n\u003cli\u003eType: UV sensor-port plug and nut assembly\u003c\/li\u003e\n\u003cli\u003eUPC: 880027006748\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eThe 310120 O-ring is also sold separately. Luminor's RAINIER manual lists a different sensor O-ring (310040), so RAINIER owners should confirm parts against their manual.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304819089589,"sku":"300016","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-300016-2000x2000-draft-review.webp?v=1789616353"},{"product_id":"luminor-mod-sherpa-blackcomb-wireless-uv-system-monitor","title":"Luminor MOD-SHERPA Wireless UV System Monitor for BLACKCOMB 5.1 and 6.1","description":"\u003cp dir=\"ltr\"\u003eThe MOD-SHERPA is a genuine Luminor wireless monitoring module for BLACKCOMB 5.1 and 6.1 UV systems, including BLACKCOMB-HO 5.1\/6.1. A transmitter plugs into the UV controller and sends system status to a small remote display you can place near a kitchen faucet or other convenient spot, up to 150 feet (46 m) away. You can see at a glance whether your UV system is working without going to the basement or equipment room.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat the remote display shows\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGreen: good. No active alarms; water is being treated\u003c\/li\u003e\n\u003cli\u003eYellow: caution. A minor alarm is active; check the system\u003c\/li\u003e\n\u003cli\u003eRed: alarm. A major alarm is active; the water is not safe to drink until resolved\u003c\/li\u003e\n\u003cli\u003eBlue: lost connection between the transmitter and the display\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKit includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eSHERPA transmitter (plugs into the controller IEP port)\u003c\/li\u003e\n\u003cli\u003eSHERPA remote display (receiver)\u003c\/li\u003e\n\u003cli\u003eNorth American power adapter (NEMA 1-15) for the display\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility and requirements\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBLACKCOMB 5.1 and 6.1 (LB5, LB6) and BLACKCOMB-HO 5.1 and 6.1 (LBH5, LBH6), including NSF Class A and B models\u003c\/li\u003e\n\u003cli\u003eRequires the Infinite Expandability Port (IEP) on the controller; not available for BLACKCOMB 4.1 or HO 4.1\u003c\/li\u003e\n\u003cli\u003eNot compatible with the MOD-RAM remote alarm module on the same system\u003c\/li\u003e\n\u003cli\u003eOne transmitter supports up to five remote displays; extra displays are available without a transmitter (MOD-SHERPA-NT)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eTransmitter and display are paired with encryption for a secure link. Wireless range depends on the building: walls, metal and other obstacles reduce it, and Luminor notes the SHERPA is best suited to residential installations. FCC and Industry Canada approved.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: MOD-SHERPA\u003c\/li\u003e\n\u003cli\u003eWireless range: up to 150 ft (46 m), depending on installation\u003c\/li\u003e\n\u003cli\u003eReceivers per transmitter: up to 5\u003c\/li\u003e\n\u003cli\u003eDisplay power: 5V wall adapter, North American plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304822399157,"sku":"MOD-SHERPA","price":184.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-mod-sherpa-2000x2000-draft-review.webp?v=1789616467"},{"product_id":"luminor-lb5-101b-uv-system-nsf-class-b-13-gpm","title":"Luminor LB5-101B Blackcomb 5.1 UV System NSF Class B 13 GPM","description":"\u003cp dir=\"ltr\"\u003eThe Luminor LB5-101B BLACKCOMB 5.1 is a UV water treatment system certified to NSF\/ANSI 55 Class B. With its built-in flow restrictor it is rated at 13 GPM (49.2 L\/min) at a UV dose of 16 mJ\/cm² and 70% UV transmittance. Class B systems provide supplemental bactericidal treatment of water that is already considered safe to drink, such as treated municipal water, reducing normally occurring non-pathogenic nuisance microorganisms. It uses a 39-watt UV lamp in a polished 304 stainless steel chamber, with 3\/4-inch MNPT connections.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow it works and alerts you\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eThe full-colour LCD BLACKCOMB 5.1 controller shows remaining lamp life, diagnostics and fault messages, gives a yellow caution 30 days before the lamp expires and an audible and visual alarm at lamp failure, and shows a service reminder every 6 months. Its Infinite Expandability Port (IEP) accepts an optional RS-B2.5 UV intensity sensor and Luminor modules such as MOD-SOL, MOD-420, MOD-RAM, MOD-SHERPA and the LFM flow meter. The controller reports lamp status; it does not by itself confirm the water is safe to drink, so Luminor recommends testing your water for microbiological contaminants regularly.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClass B vs. Class A\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eClass B is not intended for water with known contamination. For untreated well water or other microbiologically unsafe supplies, choose an NSF\/ANSI 55 Class A system such as the BLACKCOMB-HO 6.1 LBH6-251A or LBH6-401A.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy the rating is 13 GPM\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eThe standard LB5-101 is rated 11 GPM at 30 mJ\/cm² and 95% UVT. The Class B rating uses a lower dose (16 mJ\/cm²) at lower water clarity (70% UVT), and the integral flow restrictor holds flow to the certified 13 GPM. Do not remove the flow restrictor.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWater quality requirements\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLuminor strongly recommends a 5-micron sediment prefilter before the UV system\u003c\/li\u003e\n\u003cli\u003eHardness under 7 gpg (soften above this); pH 6.5-8.5\u003c\/li\u003e\n\u003cli\u003eIron under 0.3 ppm, manganese under 0.05 ppm, tannins under 0.1 ppm, turbidity under 1 NTU\u003c\/li\u003e\n\u003cli\u003eUV transmittance above 85% (contact Luminor below 80% for pretreatment advice)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eCertification: NSF\/ANSI 55 Class B\u003c\/li\u003e\n\u003cli\u003eCertified flow: 13 GPM (49.2 L\/min) at 16 mJ\/cm², 70% UVT\u003c\/li\u003e\n\u003cli\u003eConnections: 3\/4-inch MNPT\u003c\/li\u003e\n\u003cli\u003eLamp: 39 W, RL-820; power draw 49 W\u003c\/li\u003e\n\u003cli\u003eElectrical: 90-265V, 50\/60 Hz; North American NEMA 5-15 plug (\"1\" suffix)\u003c\/li\u003e\n\u003cli\u003eChamber: polished 304 stainless steel, 2.5 x 35.2 inches\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 10-150 psi; water temperature: 36-149°F (2-65°C)\u003c\/li\u003e\n\u003cli\u003eUPC: 880027021758\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaintenance and replacement parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eUV lamp: RL-820. Replace every 12 months (standard lamps are rated about 9,000 hours).\u003c\/li\u003e\n\u003cli\u003eQuartz sleeve: RQ-820. Clean every 6-12 months and replace every 24 months, or sooner if scaled, cloudy or damaged.\u003c\/li\u003e\n\u003cli\u003eLamp and sleeve kit: RLQ-820\u003c\/li\u003e\n\u003cli\u003eNSF O-ring: 300070\u003c\/li\u003e\n\u003cli\u003eOptional UV sensor: RS-B2.5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e Luminor limited warranty: 10 years on the stainless steel reactor, 3 years on the controller, and 1 year on UV lamps, UV sensors and quartz sleeves.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304824430773,"sku":"LB5-101B","price":897.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-lb5-101b-2000x2000-draft-review.webp?v=1789616539"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/collections\/luminor-lb5-101b-2000x2000-draft-review.webp?v=1790098278","url":"https:\/\/espwaterproducts.com\/collections\/luminor-blackcomb-5-1-lb5-101b-13-gpm.oembed","provider":"ESP Water","version":"1.0","type":"link"}