{"title":"LUMINOR-HO 4.1 (LBH4-101)","description":"\u003cp\u003eReplacement UV lamps, quartz sleeves, controllers, parts and manuals for the Luminor Blackcomb-HO 4.1 LBH4-101 high-output UV system (10 GPM, 3\/4-inch MNPT). The LBH4-101 uses the RL-330HO lamp, RQ-330 quartz sleeve and RCHO-4.12 controller.\u003c\/p\u003e","products":[{"product_id":"luminor-rl-330ho-high-output-replacement-uv-lamp","title":"Luminor RL-330HO UV Replacement Lamp for LBH4-101, LBH5-101","description":"\u003cp dir=\"ltr\"\u003eThe RL-330HO is a genuine Luminor replacement UV lamp and lamp key for LUMINOR BLACKCOMB-HO LBH4-101, \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-ho-5-1-lbh5-101-ultraviolet-system-10-gpm\"\u003eLBH5-101\u003c\/a\u003e, and \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-ho-6-1-lbh6-101-uv-system-with-sensor-10-gpm-3-4-mnpt\"\u003eLBH6-101\u003c\/a\u003e High Output UV water treatment systems, their NSF Class A\/B variants, and the Contractor Series LBC4-101 and LBC5-101 rack systems, all listed below. It is an authentic Luminor part, not a compatible aftermarket substitute, so it drops in and treats water the way your system was originally tested and certified to perform.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe lamp is rated for 10,000 hours of use, about 12 months of continuous operation. UV-C output weakens gradually over the lamp's life, so Luminor recommends replacing it every 12 months or after 10,000 hours, whichever comes first, to keep UV output where the system needs it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor lamp matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLuminor tests and certifies its UV systems as a complete unit: lamp, chamber, and sleeve together. An authentic RL-330HO keeps your system performing the way it was certified. A non-Luminor lamp voids the system's NSF\/ANSI 55 certification and can affect your warranty coverage if a problem comes up later.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB-HO and Contractor Series systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLBH4-101\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-ho-5-1-lbh5-101-ultraviolet-system-10-gpm\"\u003eLBH5-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-blackcomb-ho-6-1-lbh6-101-uv-system-with-sensor-10-gpm-3-4-mnpt\"\u003eLBH6-101\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eLBH5-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLBH6-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLBH6-101A (NSF Class A, monitored, includes UV sensor)\u003c\/li\u003e\n\u003cli\u003eLBC4-101 (Contractor Series, 10 GPM)\u003c\/li\u003e\n\u003cli\u003eLBC5-101 (Contractor Series, 10 GPM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe A and B suffixes mark the system's NSF\/ANSI 55 monitoring class (A is monitored with a UV sensor, B is non-monitored), not a different lamp, and the Contractor Series LBC4-101\/LBC5-101 rack systems share the same \"-101\" High Output rating as the LBH4\/5\/6-101 line. All eight models above use the RL-330HO.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits Aquasana AQ-UV-10C\u003c\/strong\u003e\u003cbr\u003eThe authentic LUMINOR RL-330HO UV lamp is engineered for the Aquasana AQ-UV-10C system and replaces Aquasana lamp reference AQ-UV-L330C.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e The RL-330HO is the lamp only. For the full replacement:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rq-330-uv-quartz-sleeve-for-lbh4-101-lbh5-101-lbh6-101\"\u003eLuminor RQ-330 UV Quartz Sleeve\u003c\/a\u003e, the quartz sleeve that houses the lamp, also compatible with the LBC4-101 Contractor Series system. Replace every 24 months, or sooner if it's visibly scaled, cloudy, or damaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rlq-330ho-uv-lamp-and-sleeve-replacement-kit\"\u003eLuminor RLQ-330HO UV Lamp and Sleeve Kit\u003c\/a\u003e, which bundles the RL-330HO lamp, RQ-330 sleeve, and lamp key together for LBH4-101, LBH5-101, and LBH6-101.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672163647669,"sku":"RL-330HO","price":134.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/Luminor_RL_-_330HO_UV_Replacement_Lamp_for_LBH4_-_101_LBH5_-_101_RL-330HO.jpg?v=1788816405"},{"product_id":"luminor-rq-330-uv-quartz-sleeve-for-lbh4-101-lbh5-101-lbh6-101","title":"Luminor RQ-330 Sleeve for LBH4-101, LBH5-101, LBH6-101","description":"\u003cp\u003e\u003cspan\u003eThe LUMINOR RQ-330 is an authentic LUMINOR replacement quartz sleeve designed for the following LUMINOR BLACKCOMB-HO High Output UV water treatment systems:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBLACKCOMB-HO 4.1 LBH4-101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBLACKCOMB-HO 5.1 LBH5-101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBLACKCOMB-HO 6.1 LBH6-101\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe RQ-330 is also the confirmed compatible replacement for the Aquasana AQ-UV-Q330 quartz sleeve used in the Aquasana AQ-UV-10C UV system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits Aquasana AQ-UV-10C\u003c\/strong\u003e\u003cbr\u003eThe authentic LUMINOR RQ-330 quartz sleeve is engineered for the Aquasana AQ-UV-10C system and replaces Aquasana sleeve reference AQ-UV-Q330.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured by LUMINOR—the original manufacturer of the UV platform used in select Aquasana systems—the RQ-330 gives AQ-UV-10C system owners a confirmed LUMINOR-branded replacement option for the Aquasana AQ-UV-Q330 quartz sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat Does the Quartz Sleeve Do?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe quartz sleeve forms a protective barrier between the UV lamp and the water flowing through the treatment chamber. It prevents the lamp from coming into direct contact with water while allowing germicidal UV-C energy to pass through the chamber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe sleeve also helps the UV lamp maintain the proper operating temperature needed for consistent system performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rl-330ho-high-output-replacement-uv-lamp\"\u003eLuminor RL-330HO UV Replacement Lamp\u003c\/a\u003e, the lamp that goes inside this sleeve. Replace every 12 months, or after 10,000 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rlq-330ho-uv-lamp-and-sleeve-replacement-kit\"\u003eLuminor RLQ-330HO UV Lamp and Sleeve Kit\u003c\/a\u003e, which bundles the RL-330HO lamp and RQ-330 sleeve together for LBH4-101, LBH5-101, and LBH6-101.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVerify Before Ordering\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCheck the label on your UV chamber or confirm the existing sleeve number before ordering. Choose the RQ-330 if your system or current sleeve is identified by one of the following numbers:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAquasana AQ-UV-10C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAquasana AQ-UV-Q330\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLUMINOR LBH4-101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLUMINOR LBH5-101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLUMINOR LBH6-101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLUMINOR RQ-330\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis listing is for the replacement quartz sleeve only. The UV lamp and other system components are sold separately unless expressly stated otherwise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBacked by a full one-year, no-hassle replacement warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAquasana is a trademark of its respective owner. This product is manufactured and sold under the LUMINOR brand and is not an Aquasana-branded product.\u003c\/span\u003e\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672163745973,"sku":"RQ-330","price":41.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/Luminor-rq-330-replacement-quartz-sleeve-rq-330__94586.1691448600.1280.1280.jpg?v=1788838903"},{"product_id":"luminor-rlq-330ho-uv-lamp-and-sleeve-replacement-kit","title":"Luminor RLQ-330HO Lamp and Sleeve for LBH4-101, LBH5-101","description":"\u003cp dir=\"ltr\"\u003eThe Luminor RLQ-330HO UV Lamp and Sleeve Kit pairs a genuine \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rl-330ho-high-output-replacement-uv-lamp\"\u003eRL-330HO UV lamp\u003c\/a\u003e with its matched \u003ca href=\"https:\/\/espwaterproducts.com\/products\/luminor-rq-330-uv-quartz-sleeve-for-lbh4-101-lbh5-101-lbh6-101\"\u003eRQ-330 quartz sleeve\u003c\/a\u003e, an installation key, and replacement O-rings for a leak-tight reseal after service.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe RL-330HO lamp is rated for 10,000 hours of service (about 12 months of continuous operation), and Luminor recommends replacing the quartz sleeve every 24 months. Replacing both together keeps UV output consistent and takes the guesswork out of maintenance timing. For step-by-step instructions, see our guides on \u003ca href=\"https:\/\/espwaterproducts.com\/pages\/how-to-replace-a-uv-lamp\"\u003ehow to replace a UV lamp\u003c\/a\u003e and \u003ca href=\"https:\/\/espwaterproducts.com\/pages\/how-to-clean-a-uv-sleeve\"\u003ehow to clean a UV sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor lamp and sleeve kit matters\u003c\/strong\u003e\u003cbr\u003eLuminor's UV water treatment systems are tested and certified as a complete unit — lamp, chamber, and sleeve together. Genuine Luminor parts keep your system performing the way it was certified; a non-Luminor lamp or sleeve can void that certification and affect your warranty coverage if an issue comes up later.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB-HO and Contractor Series systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLBH4-101\u003c\/li\u003e\n\u003cli\u003eLBH5-101\u003c\/li\u003e\n\u003cli\u003eLBH6-101\u003c\/li\u003e\n\u003cli\u003eLBH5-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLBH6-101B (NSF Class B, non-monitored)\u003c\/li\u003e\n\u003cli\u003eLBH6-101A (NSF Class A, monitored, includes UV sensor)\u003c\/li\u003e\n\u003cli\u003eLBC4-101 (Contractor Series, 10 GPM)\u003c\/li\u003e\n\u003cli\u003eLBC5-101 (Contractor Series, 10 GPM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAll eight models share the same \"-101\" rating and use the identical RL-330HO lamp and RQ-330 sleeve. The A and B suffixes mark the system's NSF\/ANSI 55 monitoring class — not a different lamp or sleeve.\u003cbr\u003e\u003cbr\u003eAuqasana Replacement: The LUMINOR RLQ-330HO kit includes the RL-330HO lamp and RQ-330 quartz sleeve engineered for the Aquasana AQ-UV-10C system. \u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672164761781,"sku":"RLQ-330HO","price":175.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-luminor-rlq-330ho-uv-lamp-and-sleeve-replacement-kit-with-key-for-lbh4-101-lbh5-101-and-lbh6-101-uv-systems-rlq-330ho__38644.1691448293.1280.1280.jpg?v=1773762328"},{"product_id":"luminor-310039-quartz-sleeve-spring-for-luminor-systems","title":"Luminor 310039 Quartz Sleeve Spring for LUMINOR systems","description":"\u003cp\u003e\u003cspan\u003eThis spring is used on all Chandler Systems ultraviolet disinfection systems.  Also compatible with Luminor Blackcomb UV systems.  The spring goes inside the quartz sleeve before installing the lamp.\u003c\/span\u003e\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672195858613,"sku":"310039","price":8.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-310039-quartz-sleeve-spring-for-luminor-systems-310039__03859.1691447488.1280.1280.jpg?v=1773762122"},{"product_id":"luminor-320006-gland-nut-for-all-luminor-blackcomb-uv-systems","title":"Luminor 320006 Gland Nut for All Luminor Blackcomb UV Systems","description":"\u003cp\u003eReplacement LUMINOR Gland Nut for all Luminor Blackcomb LB4, LB5, LB6, LBH5, LBH6 series.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672200183989,"sku":"320006","price":13.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/320006__93037.1691419906.1280.1280.png?v=1773762120"},{"product_id":"luminor-300038-o-ring-for-gland-nut-luminor-blackcomb-uv-systems","title":"Luminor 300038 Gland Nut O-Ring for Blackcomb UV Systems","description":"\u003cp\u003eThe Luminor 300038 is a replacement O-ring for the 320006 gland nut used in Blackcomb UV water treatment systems.\u003c\/p\u003e\n\u003cp\u003eIt is used in the gland-nut assemblies shown for Blackcomb standard-output and Blackcomb-HO systems. Match part 300038 to the assembly in your system manual before ordering.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":43672200380597,"sku":"300038","price":1.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/300038__00319.1691419880.1280.1280.png?v=1773762120"},{"product_id":"luminor-rcho-4-12-blackcomb-ho-4-1-uv-controller","title":"Luminor RCHO-4.12 Replacement UV Controller for Blackcomb-HO 4.1 Systems","description":"\u003cp dir=\"ltr\"\u003eThe RCHO-4.12 is a genuine Luminor replacement controller (ballast) for LUMINOR BLACKCOMB-HO 4.1 high-output UV systems, LBH4-051 through LBH4-401. It powers the high-output UV lamp and monitors its status: a tri-colour LED shows system condition, and a 4-digit display shows remaining lamp life (press the button to see total running time). It accepts 90-265V, 50\/60 Hz through an IEC power inlet; the power cord is sold separately.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow the lamp alerts work\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eThe LED is green when the lamp is on and within its rated life. At 30 days remaining it turns yellow, and at 7 days it adds an audible chirp. When the lamp fails or expires the LED turns red and a buzzer sounds; the alarm can be deferred for 7 days, up to three times, by holding the button for 5 seconds. After installing a new lamp, reset the timer by holding the button for 10 seconds until the display shows rSt3, rSt2, rSt1 and beeps.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor BLACKCOMB-HO 4.1 systems\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLBH4-051 (5 GPM)\u003c\/li\u003e\n\u003cli\u003eLBH4-101 (10 GPM)\u003c\/li\u003e\n\u003cli\u003eLBH4-151 (15 GPM)\u003c\/li\u003e\n\u003cli\u003eLBH4-251 (25 GPM)\u003c\/li\u003e\n\u003cli\u003eLBH4-401 (40 GPM)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eBLACKCOMB-HO 5.1 and 6.1 systems (LBH5 and LBH6) use the RCHO-56.12 controller instead. The 4.1 controller has no expansion port, so it does not support a UV sensor or add-on modules.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: RCHO-4.12\u003c\/li\u003e\n\u003cli\u003eElectrical input: 90-265V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower connection: IEC inlet, cord sold separately\u003c\/li\u003e\n\u003cli\u003eDisplay: tri-colour status LED and 4-digit lamp-life display\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-year Luminor limited warranty on controllers\u003c\/li\u003e\n\u003cli\u003eUPC: 880027000241\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e For a North American 120V outlet, add the Luminor 260004 IEC power cord (NEMA 5-15 plug).\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304817844405,"sku":"RCHO-4.12","price":346.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-rcho-4-12-2000x2000-draft-review.webp?v=1789616308"},{"product_id":"luminor-260004-iec-power-cord-north-american-120v","title":"Luminor 260004 IEC Power Cord North American 120V NEMA 5-15","description":"\u003cp dir=\"ltr\"\u003eThe 260004 is a genuine Luminor 3-wire IEC power cord with a North American NEMA 5-15 plug for standard 120V outlets. Luminor UV equipment that uses an IEC power inlet, including BLACKCOMB-HO controllers, NSF Class A systems and RAINIER systems, requires a separate IEC cord, and the 260004 is Luminor's North American 120V version.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRCHO-4.12 replacement controller for BLACKCOMB-HO 4.1 (sold without a cord)\u003c\/li\u003e\n\u003cli\u003eRCHO-56.12 replacement controller for BLACKCOMB-HO 5.1\/6.1 (sold without a cord)\u003c\/li\u003e\n\u003cli\u003eOther Luminor UV equipment with an IEC inlet specifying cord 260004\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: 260004\u003c\/li\u003e\n\u003cli\u003ePlug: NEMA 5-15, North American 120V\u003c\/li\u003e\n\u003cli\u003eEquipment end: IEC connector, 3-wire\u003c\/li\u003e\n\u003cli\u003eUPC: 880027007028\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOther Luminor cord options\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e260009: North American 230V, NEMA 6-15\u003c\/li\u003e\n\u003cli\u003e260005: European CEE 7\/7\u003c\/li\u003e\n\u003cli\u003e260006: Australian\/New Zealand AS\/NZS 3112\u003c\/li\u003e\n\u003cli\u003e260008: British BS 1363\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304819417269,"sku":"260004","price":19.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-260004-2000x2000-draft-review.webp?v=1789616363"},{"product_id":"luminor-lbh4-101-blackcomb-ho-4-1-uv-system-10-gpm","title":"Luminor LBH4-101 Blackcomb-HO 4.1 UV Water System 10 GPM","description":"\u003cp dir=\"ltr\"\u003eThe Luminor LBH4-101 BLACKCOMB-HO 4.1 is a high-output UV water disinfection system rated at 10 GPM (37.9 L\/min) at a UV dose of 30 mJ\/cm² and 95% UV transmittance. A 34-watt high-output lamp in a 316L stainless steel chamber (3.5 x 16.5 inches) gives a compact system with 3\/4-inch MNPT connections, sized for whole-home use in a typical three-bathroom house. The RCHO-4.12 controller shows lamp status with a tri-colour LED and remaining lamp life on a 4-digit display, with audible and visual alarms.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow it alerts you\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eThe LED is green when the lamp is on and within its rated life, turns yellow 30 days before the lamp expires (with a chirp in the last 7 days), and turns red with a buzzer when the lamp fails or expires. The controller reports lamp status; it does not by itself confirm the water is safe to drink, so Luminor recommends testing your water for microbiological contaminants regularly.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWater quality requirements\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLuminor strongly recommends a 5-micron sediment prefilter before the UV system\u003c\/li\u003e\n\u003cli\u003eHardness under 7 gpg (soften above this); pH 6.5-8.5\u003c\/li\u003e\n\u003cli\u003eIron under 0.3 ppm, manganese under 0.05 ppm, tannins under 0.1 ppm, turbidity under 1 NTU\u003c\/li\u003e\n\u003cli\u003eUV transmittance above 85% (contact Luminor below 80% for pretreatment advice)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eModel: LBH4-101 (BLACKCOMB-HO 4.1)\u003c\/li\u003e\n\u003cli\u003eFlow: 10 GPM at 30 mJ\/cm², 95% UVT\u003c\/li\u003e\n\u003cli\u003eConnections: 3\/4-inch MNPT\u003c\/li\u003e\n\u003cli\u003eLamp: 34 W high output, RL-330HO; power draw 38 W (36 W at 230V)\u003c\/li\u003e\n\u003cli\u003eController: RCHO-4.12, 90-265V, 50\/60 Hz, IEC power inlet; North American NEMA 5-15 configuration\u003c\/li\u003e\n\u003cli\u003eChamber: 316L stainless steel, 3.5 x 16.5 inches\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 10-150 psi; water temperature: 36-149°F (2-65°C)\u003c\/li\u003e\n\u003cli\u003eUPC: 880027055371\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaintenance and replacement parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eUV lamp: RL-330HO. Replace every 12 months (high-output lamps are rated 10,000 hours).\u003c\/li\u003e\n\u003cli\u003eQuartz sleeve: RQ-330. Clean every 6-12 months and replace every 24 months, or sooner if scaled, cloudy or damaged.\u003c\/li\u003e\n\u003cli\u003eLamp and sleeve kit: RLQ-330HO\u003c\/li\u003e\n\u003cli\u003eReplacement controller: RCHO-4.12 (IEC cord 260004 sold separately)\u003c\/li\u003e\n\u003cli\u003eOptional temperature management: 130032 temperature relief valve (3\/4-inch) or 130014 LUMI-cool fan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eBLACKCOMB-HO 4.1 systems do not support a UV sensor or add-on modules; choose a BLACKCOMB-HO 5.1 (LBH5-101) or 6.1 (LBH6-101) for the colour controller, expansion port and UV monitoring.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e Luminor limited warranty: 10 years on the stainless steel reactor, 3 years on the controller, and 1 year on UV lamps, UV sensors and quartz sleeves.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304823546037,"sku":"LBH4-101","price":805.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-lbh4-101-2000x2000-draft-review.webp?v=1789616507"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/collections\/luminor-lbh4-101-2000x2000-draft-review.webp?v=1790098272","url":"https:\/\/espwaterproducts.com\/collections\/luminor-blackcomb-ho-4-1-lbh4-101-10-gpm.oembed","provider":"ESP Water","version":"1.0","type":"link"}