{"title":"LUMINOR RAINIER 6.0 (LR6-1405)","description":"\u003cp\u003eReplacement UV lamps and quartz sleeves for Luminor Rainier 140-series light-commercial UV systems, including LR6-1405 and LR5-1405, rated at 180 GPM (30 mJ\/cm² at 95% UVT). The 140 series uses two RL-843A lamps (standard and -50 low-UVT models; -TOC models use RL-843A-TOC) and two RQ-843 quartz sleeves.\u003c\/p\u003e","products":[{"product_id":"luminor-rq-843-quartz-sleeve-for-rainier-lr5-lr6-140","title":"Luminor RQ-843 Replacement Quartz Sleeve for Rainier LR5\/LR6-140 UV Systems","description":"\u003cp dir=\"ltr\"\u003eThe RQ-843 is a genuine Luminor replacement quartz sleeve for LUMINOR RAINIER 140-series light-commercial UV water treatment systems: the RAINIER 5.0 (LR5-140X, non-monitored) and RAINIER 6.0 (LR6-140X, UV-monitored), including the low-UVT (-50) and TOC-reduction (-TOC) versions. The sleeve surrounds the UV lamp inside the stainless steel chamber, keeping the lamp dry while its 254 nm UV output passes into the water. Every 140-series chamber holds two lamps, so each system uses two RQ-843 sleeves.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to clean or replace the sleeve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLuminor's RAINIER manual calls for cleaning the quartz sleeve at least once a year, and more often when water hardness is near 7 grains per gallon or iron and manganese are present, because scale and mineral deposits block UV light. Clean both sleeves whenever you change the RL-843A lamps, and replace the sleeves every 24 months, or sooner if cracked, etched or still cloudy after cleaning.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor sleeve matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRAINIER flow ratings, such as 180 GPM at 30 mJ\/cm² and 95% UV transmittance for the 140 series, are based on Luminor's matched lamp, sleeve and chamber. The manual directs replacement with the same part number shown on the reactor label, and genuine Luminor quartz sleeves carry Luminor's one-year limited warranty.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor RAINIER systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLR6-1401 and LR6-1405 (RAINIER 6.0, UV-monitored, 180 GPM)\u003c\/li\u003e\n\u003cli\u003eLR5-1401 and LR5-1405 (RAINIER 5.0, non-monitored, 180 GPM)\u003c\/li\u003e\n\u003cli\u003eLR6-140X-50 (low-UVT version, 49 GPM at 50% UVT)\u003c\/li\u003e\n\u003cli\u003eLR5-140X-TOC and LR6-140X-TOC (TOC reduction, 40 GPM at 150 mJ\/cm²)\u003c\/li\u003e\n\u003cli\u003e140-series systems used on hot water (95 GPM at 75% UVT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe last digit of a RAINIER model number is the power-plug code (1 = North American 120V, 2 = European CEE 7\/7, 3 = British BS 1363, 4 = Australian\/NZ AS\/NZS 3112, 5 = North American 230V NEMA 6-15). It does not change the sleeve: every LR5-140X and LR6-140X uses the RQ-843. Other RAINIER sizes use different sleeves: RQ-500 for the 35 series, RQ-720 for the 55 and 110 series, and RQ-1000 for the 85 and 175 series.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: RQ-843\u003c\/li\u003e\n\u003cli\u003eLength: 978 mm (38.5 inches)\u003c\/li\u003e\n\u003cli\u003eQuantity per 140-series system: 2\u003c\/li\u003e\n\u003cli\u003eUPC: 880027010646\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e The RQ-843 is the sleeve only. The matching lamp is the Luminor RL-843A (172 W; replace every 12 months) for standard and low-UVT systems; TOC-reduction systems use the RL-843A-TOC.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304811552949,"sku":"RQ-843","price":137.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-rq-843-2000x2000-draft-review.webp?v=1789616031"},{"product_id":"luminor-rl-843a-rainier-replacement-uv-lamp-172w","title":"Luminor RL-843A Replacement UV Lamp for Rainier LR5\/LR6-140 UV Systems","description":"\u003cp dir=\"ltr\"\u003eThe RL-843A is a genuine Luminor 172-watt replacement UV lamp for LUMINOR RAINIER 140-series light-commercial UV water treatment systems (RAINIER 5.0 LR5-140X and RAINIER 6.0 LR6-140X). It is a low-pressure amalgam lamp with a black base and 254 nm germicidal output for general disinfection, rated for 12,000 hours of use; replace it every 12 months to keep UV output at the rated level. Each 140-series system uses two RL-843A lamps.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eThe RAINIER controller counts down the hours remaining on the lamps. The display starts flashing at 512 hours remaining, and an alarm sounds at zero. Replace both lamps with the part number shown on the reactor label, then reset the lamp countdown as described in the RAINIER manual.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy a genuine Luminor lamp matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp dir=\"ltr\"\u003eRAINIER flow ratings, such as 180 GPM at 30 mJ\/cm² and 95% UV transmittance for the 140 series, are based on Luminor's matched lamp, sleeve and chamber. A genuine RL-843A delivers the output the system was rated with and carries Luminor's one-year limited lamp warranty.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFits these Luminor RAINIER systems\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLR6-1401 and LR6-1405 (RAINIER 6.0, UV-monitored, 180 GPM)\u003c\/li\u003e\n\u003cli\u003eLR5-1401 and LR5-1405 (RAINIER 5.0, non-monitored, 180 GPM)\u003c\/li\u003e\n\u003cli\u003eLR6-140X-50 low-UVT version (49 GPM at 50% UVT)\u003c\/li\u003e\n\u003cli\u003e140-series systems used on hot water (95 GPM at 75% UVT)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003eThe last digit of a RAINIER model number is the power-plug code (1 = North American 120V, 5 = North American 230V NEMA 6-15, 2\/3\/4 = European, British and Australian plugs), so all LR5-140X and LR6-140X general-disinfection systems use the RL-843A. TOC-reduction models (LR5\/LR6-140X-TOC) need the RL-843A-TOC instead, which adds 185 nm output.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: RL-843A\u003c\/li\u003e\n\u003cli\u003eLamp power: 172 watts\u003c\/li\u003e\n\u003cli\u003eLength (base face to base face): 843 mm (33.2 inches)\u003c\/li\u003e\n\u003cli\u003eOutput: 254 nm, general disinfection; black base\u003c\/li\u003e\n\u003cli\u003eRated life: 12,000 hours\u003c\/li\u003e\n\u003cli\u003eQuantity per 140-series system: 2\u003c\/li\u003e\n\u003cli\u003eUPC: 880027010561\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComplete your replacement\u003c\/strong\u003e The RL-843A is the lamp only. The matching quartz sleeve is the Luminor RQ-843 (978 mm); clean or replace both sleeves when you change lamps.\u003c\/p\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304817582261,"sku":"RL-843A","price":517.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-rl-843a-2000x2000-draft-review.webp?v=1789616298"},{"product_id":"luminor-260004-iec-power-cord-north-american-120v","title":"Luminor 260004 IEC Power Cord North American 120V NEMA 5-15","description":"\u003cp dir=\"ltr\"\u003eThe 260004 is a genuine Luminor 3-wire IEC power cord with a North American NEMA 5-15 plug for standard 120V outlets. Luminor UV equipment that uses an IEC power inlet, including BLACKCOMB-HO controllers, NSF Class A systems and RAINIER systems, requires a separate IEC cord, and the 260004 is Luminor's North American 120V version.\u003c\/p\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRCHO-4.12 replacement controller for BLACKCOMB-HO 4.1 (sold without a cord)\u003c\/li\u003e\n\u003cli\u003eRCHO-56.12 replacement controller for BLACKCOMB-HO 5.1\/6.1 (sold without a cord)\u003c\/li\u003e\n\u003cli\u003eOther Luminor UV equipment with an IEC inlet specifying cord 260004\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eManufacturer part number: 260004\u003c\/li\u003e\n\u003cli\u003ePlug: NEMA 5-15, North American 120V\u003c\/li\u003e\n\u003cli\u003eEquipment end: IEC connector, 3-wire\u003c\/li\u003e\n\u003cli\u003eUPC: 880027007028\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOther Luminor cord options\u003c\/strong\u003e\u003c\/p\u003e\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e260009: North American 230V, NEMA 6-15\u003c\/li\u003e\n\u003cli\u003e260005: European CEE 7\/7\u003c\/li\u003e\n\u003cli\u003e260006: Australian\/New Zealand AS\/NZS 3112\u003c\/li\u003e\n\u003cli\u003e260008: British BS 1363\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Luminor","offers":[{"title":"Default Title","offer_id":53304819417269,"sku":"260004","price":19.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/files\/luminor-260004-2000x2000-draft-review.webp?v=1789616363"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/1197\/1509\/collections\/luminor-rainier-6-0-lr6-1405-2-lamp-2000x2000.webp?v=1790098735","url":"https:\/\/espwaterproducts.com\/collections\/luminor-rainier-6-0-lr6-1405-180-gpm.oembed","provider":"ESP Water","version":"1.0","type":"link"}