Very pleased with the product
"Very pleased with the product and the service. Thank you."
Système UV VIQUA VT1 1 GPM, raccord fileté NPT 3/8" et 1/2" combiné
Les systèmes UV VIQUA VT1 traitent l'eau à un débit de 1 GPM, ce qui les rend parfaits pour les applications à faible débit telles que les robinets simples et les fontaines à eau. Leur taille compacte rend le VT1 facile à manipuler et à installer, tandis que la chambre en acier inoxydable protège l'ampoule UV des dommages. De plus, vous savez que vous achetez de la qualité lorsque vous choisissez VIQUA. Le VIQUA VT1 est doté d'un simple témoin lumineux et fonctionne avec une tension de 100-240 V, 50-60 Hz. Bien que le VIQUA VT1 soit disponible en différentes tensions, veuillez vérifier quelles versions répondent à vos besoins, car les connexions électriques sont intégrées au contrôleur, ce qui rend des modèles spécifiques adaptés à des tensions spécifiques. Pour plus d'informations sur le VIQUA VT1, veuillez consulter la fiche technique téléchargeable ci-dessous.
Lisez un test complet du système UV à robinet unique VIQUA VT1.
Pour demander que les types de prises électriques internationales « F » (Europe), « G » (Royaume-Uni) et « I » (Australie) soient inclus avec votre système sans frais supplémentaires, veuillez envoyer un courriel au service clientèle après avoir passé votre commande.
Overall rating: 4.3333335 / 5 from 3 reviews.
Review topics: ["idea","rings"].
"Very pleased with the product and the service. Thank you."
"The "O" rings supplied with the Viqua are too thin for the intended purpose of sealing the "fused quartz sleeve" to the unit's metal body. Despite tightening the plastic end caps ("retaining nuts") as much as I dared (aircraft mechanic - over-torquing breaks things and damages "O" rings!) the unit began to leak slightly after a few days. After 3 "just a bit tighter" attempts, when it continued to leak, finally installed slightly thicker "O" rings - appears to have fixed the issue. OEM "O" rings undamaged and seated properly - just too thin. Water pressure well under max listed in the manual. Keep an eye on this thing for a week or so until you're sure it won't leak. As it heats up (from the UV lamp) the pressure in the cylinder will increase, so you may not notice the leak right away. (Based on this I would always mount the Viqua vertically, and never horizontally, to prevent water seepage into the lamp connector.) Also, for stability of the installation, another mounting bracket would be a good idea. Only 1 bracket is supplied, and it only has 1 mounting hole - this allows the unit to move if it gets bumped - as it will in under-sink locations - not a good idea in plumbing installations."
"I purchased the product to use in wine making, will attempt to render yeast inactive with one? or two? trips through the light chamber. Because UV light kills yeast this looked like a viable solution to avoid use of sulfur dioxide or other chemical yeast-o-cides. The product looks very well built and will last the rest of my life easily given the limited use it will receive, Thank you for a great product at a good price."
Overall rating: 4.3333335 / 5 from 3 reviews.
Review topics: ["idea","rings"].
"Very pleased with the product and the service. Thank you."
"The "O" rings supplied with the Viqua are too thin for the intended purpose of sealing the "fused quartz sleeve" to the unit's metal body. Despite tightening the plastic end caps ("retaining nuts") as much as I dared (aircraft mechanic - over-torquing breaks things and damages "O" rings!) the unit began to leak slightly after a few days. After 3 "just a bit tighter" attempts, when it continued to leak, finally installed slightly thicker "O" rings - appears to have fixed the issue. OEM "O" rings undamaged and seated properly - just too thin. Water pressure well under max listed in the manual. Keep an eye on this thing for a week or so until you're sure it won't leak. As it heats up (from the UV lamp) the pressure in the cylinder will increase, so you may not notice the leak right away. (Based on this I would always mount the Viqua vertically, and never horizontally, to prevent water seepage into the lamp connector.) Also, for stability of the installation, another mounting bracket would be a good idea. Only 1 bracket is supplied, and it only has 1 mounting hole - this allows the unit to move if it gets bumped - as it will in under-sink locations - not a good idea in plumbing installations."
"I purchased the product to use in wine making, will attempt to render yeast inactive with one? or two? trips through the light chamber. Because UV light kills yeast this looked like a viable solution to avoid use of sulfur dioxide or other chemical yeast-o-cides. The product looks very well built and will last the rest of my life easily given the limited use it will receive, Thank you for a great product at a good price."