Manufacturer
"I received the filters.the membrane 33001056RO had DOW label. When received it it looked generic. Where are they made? The sock and carbon made in China. I won't rate with tell me the manufacturer."
Hydrotech 33001056 Membrana de ósmosis inversa 75 GPD, banda azul
Q&As
Hydrotech 33001056 Membrana de ósmosis inversa 75 GPD, banda azul
Q&As
Part Number:
33001056
La membrana de ósmosis inversa de alta eficiencia produce 75 GPD de agua purificada para sistemas Hydrotech compatibles.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Descripción
La membrana Hydrotech 33001056 RO es una membrana compuesta de película delgada que es compatible con varios sistemas Hydrotech, incluidos los sistemas de las series 1240, E, M y Pro, HT101, HT102, HT103 y HT123. Produce hasta 75 galones de agua filtrada por día y se envasa en seco para prolongar su vida útil.
Specs
- Caudal: 75 galones por día
- Dimensiones: 12-7/8" X 1-3/4"
- Reemplace cada 24 meses
Features
This Item Fits These Select Systems
Overall rating: 3.6666667 / 5 from 3 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Manufacturer
"I received the filters.the membrane 33001056RO had DOW label. When received it it looked generic. Where are they made? The sock and carbon made in China. I won't rate with tell me the manufacturer."
Outstanding Service & Product/Greatly Appreciated!!
"Outstanding Service & Product/Greatly Appreciated!!"
Works well. We replaced a
"Works well. We replaced a 50 gpd that was clogged and could barely fill a bottle from the tap and could not produce much ice. The 75gpd has a strong stream from the tap and keeps up with our ice demand."
Q&A
Q:
What is the rated production of the Hydrotech 33001056?
A:
It is rated for up to 75 gallons per day under specified test conditions. Actual output varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the Hydrotech 33001056?
A:
The catalog lists: Platinum 1240, 1240 : E, 1240 : M and Pro, 4VTFC75G (1240203-00), 4VTFC75G-PB (1240303-00). Confirm the exact model and part number on your equipment before ordering Hydrotech 33001056.
Q:
What should I verify before ordering?
A:
Match the exact part number and residential Hydrotech configuration identified by a blue band, including element dimensions, seal arrangement, permeate connection, and required flow control. A 75 GPD membrane requires the matching flow-control arrangement; do not substitute it into a lower-output system without approval.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production, product-water TDS or conductivity, and pressure. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Membrane area and rated output must match the vessel, pressure, pump, recovery target, and flow-control arrangement.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
