These filters performed as expected
"These filters performed as expected"
Membrana de OI AXEON HF1-2521 150 PSI 400 GPD 200375
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Membrana de ósmosis inversa comercial original HF1-2521 RO. Esta membrana de ósmosis inversa de la serie HF1 mide 2.5 por 21 pulgadas y ofrece fiabilidad, alto rendimiento y resultados consistentes para aplicaciones comerciales. Todas las membranas se envían secas para una vida útil indefinida, se prueban al 100% la integridad al vacío y también se pueden solicitar con prueba de humedad individual.
Esta membrana de ósmosis inversa funciona en los siguientes sistemas comerciales de ósmosis inversa:
Overall rating: 4.3333335 / 5 from 3 reviews.
Review topics: [].
"These filters performed as expected"
"Customer service was excellent. I switched to purchasing items from this company because they were willing to help me. The last company i dealt with in buying these supplies expected me to contact the manufacturer directly. I would definitely recommend ESP Water Products."
"Web site would not let me finish my order, I had to call and place my order, so it took longer as it was a weekend. And i still havent received the product or an update on the where abouts the product is."
Q:
What is the rated output of the AXEON HF1-2521 / 200375?
A:
It is rated for up to 400 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-2521 / 200375?
A:
The catalog lists: HF1-2521, AT-1000, AT-500, HT-1000, HT-500, COM-II-250S, COM250S. Confirm the exact model and part number on your equipment before ordering AXEON HF1-2521 / 200375.
Q:
What should I verify before ordering?
A:
Match the exact part number and 2.5-by-21-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.