Funda de cuarzo UV VIQUA QS-200 para SPV-200, SP200-HO, SPV-3.5, SC-200, SCM-200
Funda de cuarzo UV VIQUA QS-200 para SPV-200, SP200-HO, SPV-3.5, SC-200, SCM-200
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Funda de repuesto para sistemas UV VIQUA Sterilight SPV-200, SPV-3.5, SP200-HO, SC200 y SCM-200 obsoletos. La funda de cuarzo evita que la lámpara UV se cortocircuite y mantiene la temperatura de funcionamiento ideal de la lámpara de 104 grados Fahrenheit. La acumulación de minerales dificulta la eficacia de la lámpara. Esta funda presenta un extremo abierto y un extremo abovedado en el otro.
Nota: Tenga en cuenta que el QS-200 abovedado es para sistemas modelo UV fabricados entre 2013 y 2017. Los modelos anteriores o posteriores a esas fechas requieren una funda de cuarzo diferente, la QS-001.
- Longitud: 10.0"
- Sólo válido para los años: 2013-2017.
- Reemplace cada 24 meses o según sea necesario
Q:
Which systems use the VIQUA QS-200?
A:
The catalog does not provide an approved model list for VIQUA QS-200. Match the exact part number, dimensions, connection style, and equipment generation before ordering.
Q:
What does the VIQUA QS-200 do?
A:
It isolates the UV lamp from chamber water while allowing UV energy to pass through and helping the lamp operate at its intended temperature. This sleeve has one open end and one domed end. The product page identifies the domed QS-200 for systems made from 2013–2017; other production years may require QS-001.
Q:
How often should the quartz sleeve be replaced?
A:
Inspect it during lamp service and replace it if cracked, chipped, clouded, etched, or no longer restorable. Many owners replace sleeves about every 24 months, subject to the system manual and water conditions.
Q:
Can mineral scale be removed from the sleeve?
A:
Light scale can often be removed with the manufacturer-approved method. Rinse thoroughly and replace the sleeve if deposits, clouding, or etching remain.
Q:
Do I need new O-rings when replacing the sleeve?
A:
Inspect the seals whenever the chamber is opened. Replace O-rings that are cut, flattened, stretched, brittle, or leaking; use only a light coating of food-grade silicone lubricant if directed.
Q:
How can I avoid breaking the new sleeve?
A:
Shut off power and water, relieve pressure, handle quartz with clean gloves, remove grit from sealing surfaces, align the sleeve without forcing it, and tighten retaining parts evenly.
