5 stars
"I am completely satisfied with the product and service"
VIQUA 602810-104 Kit de funda y lámpara UV para F, F4, F4+, F4-V, PRO15
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Este kit incluye la lámpara UV de repuesto y la funda de cuarzo que la acompaña para los sistemas modelos VIQUA F, F+, F4, F4+, F4-V y PRO15. Es extremadamente importante reemplazar la bombilla cada 12 meses para mantener la eficacia adecuada del sistema. La funda se puede reemplazar cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la eficacia de la lámpara.
Por qué es importante utilizar una lámpara VIQUA original: Los sistemas y lámparas UV de VIQUA se prueban y certifican como una unidad completa. El uso de una lámpara VIQUA auténtica garantiza el rendimiento adecuado del sistema y el tratamiento del agua. Este video explica los 5 riesgos de las lámparas de posventa que no son de VIQUA y cómo identificar las lámparas VIQUA auténticas.
NOTA: El uso de lámparas que no son de VIQUA anula todas las certificaciones del sistema UV y puede comprometer su garantía en caso de que surja algún problema.
Overall rating: 5.0 / 5 from 5 reviews.
Review topics: [service].
"I am completely satisfied with the product and service"
"*****. I can recommend this lamp"
"Works as expected."
"All of my order arrived in good condition and timely. Thank you!"
"Fast shipping and got exactly what I ordered. Will use again!"
Q:
What is included with the VIQUA 602810-104?
A:
The kit includes the matching VIQUA UV lamp and quartz sleeve. Do not assume O-rings, sleeve bolts, or other seals are included unless shown in package contents.
Q:
Which systems use the VIQUA 602810-104?
A:
The catalog-approved Fits value lists: F4, F4-V, PRO15, UVMax F4, UVMax F4 Plus, F4 (650686), F4+ (650687), F4-50+ (650640-R), F4-V (660041-R), F4-V+ (660044-R). Match the exact system label and part number before ordering VIQUA 602810-104.
Q:
How often should the lamp and sleeve be replaced?
A:
Replace the lamp every 12 months. The sleeve is commonly replaced around 24 months or as needed. Inspect the sleeve during service and replace it sooner if cracked, clouded, etched, or no longer restorable.
Q:
Why buy a combined lamp-and-sleeve kit?
A:
It lets you service both major optical components at one time, which can reduce repeat disassembly when both parts are due.
Q:
Can mineral scale be cleaned from the old sleeve?
A:
Light deposits may be removable using the approved method. Replace the sleeve if clouding, etching, or deposits remain after cleaning.
Q:
What should I check after installing the kit?
A:
Confirm the sleeve is dry inside, seals are clean and seated, retaining parts are secure, the chamber does not leak, the controller recognizes the lamp, and the timer is reset.