VIQUA 602976 Funda de cuarzo UV para PRO30, PRO50, J, K, S80
VIQUA 602976 Funda de cuarzo UV para PRO30, PRO50, J, K, S80
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Funda de repuesto para sistemas modelo VIQUA Pro30, Pro50, J, J+, K y K+. La funda de cuarzo evita que la lámpara UV se cortocircuite y mantiene la temperatura de funcionamiento ideal de la lámpara de 104 grados Fahrenheit. La acumulación de minerales dificulta la eficacia de la lámpara.
- Reemplace cada 24 meses o según sea necesario
Q:
Which systems use the VIQUA 602976 quartz sleeve?
A:
The catalog lists: PRO30, PRO50, S80, UVMAX PRO30, UVMAX PRO50, UVMax J, UVMax J Plus, UVMax K, UVMax K Plus, K (660001-R), K+ (660002-R), PRO24-100 (660095-R), PRO24-186 (660086-R), PRO30 (650659), PRO50 (660003-R). Confirm the exact model and part number on your equipment before ordering VIQUA 602976 quartz sleeve.
Q:
What does the VIQUA 602976 quartz sleeve do?
A:
The quartz sleeve isolates the UV lamp from chamber water while allowing UV energy to pass through.
Q:
When should the quartz sleeve be replaced?
A:
Replace it if it is cracked, chipped, clouded, etched, or cannot be restored during maintenance. Follow the equipment manual for the scheduled interval.
Q:
Can mineral deposits be removed from the sleeve?
A:
Light deposits can often be removed with the manufacturer-approved method. Replace the sleeve if clouding, etching, or deposits remain.
Q:
Should the sleeve seals be replaced too?
A:
Inspect the O-rings whenever the sleeve is serviced. Replace seals that are cut, flattened, stretched, brittle, or leaking.
Q:
What installation mistakes can damage a quartz sleeve?
A:
Forcing the sleeve, uneven retaining pressure, grit on sealing surfaces, and pinched O-rings can cause cracks or leaks. Relieve pressure and handle quartz with clean gloves.
