VIQUA VH410M Sistema UV con Sensor 18 GPM 3/4" y 1" NPT
Actualice del VIQUA VH410 al VH410M para obtener retroalimentación continua sobre el rendimiento de su sistema a través del sensor UV. Con una capacidad de 18 GPM, el VH410M se utiliza para casas grandes (4-7 baños) y aplicaciones comerciales ligeras. Capaz de 100-240V, 50-60Hz
FIABLE: Tecnología de sensor UV de última generación para brindarle retroalimentación de rendimiento en tiempo real, para mayor tranquilidad
APLICACIÓN: Filtro ultravioleta recomendado para caudales de hasta 18 GPM (68 lpm) en casas grandes o aplicaciones comerciales ligeras
SIN RIESGOS: 10 años de garantía en la cámara VIQUA, 3 años en la parte eléctrica y el hardware, y 1 año de garantía en lámparas, manguitos y sensores
PROTECCIÓN: Protección contra bacterias, virus y microorganismos dañinos como E.coli, Giardia y Cryptosporidium*
Para solicitar que se incluyan los tipos de enchufes eléctricos internacionales "F" (Europa), "G" (Reino Unido) e "I" (Australia) con su sistema sin cargo, envíe un correo electrónico a atención al cliente después de realizar el pedido.
Overall rating: 5.0 / 5 from 1 reviews.
Review topics: [].
"This unit replaced a Sterilight SQ12 that developed a bad ballast, so I am familiar with this family of UV lights. The new VH410M is meticulously crafted, the welds are perfect. The external ballast makes it easy to change to a new one should that be necessary and the monitor shows me that the lamp is working. I could have purchased this system for 200 dollars less from a warehouse retailer, but chose to go with ESP because they actually know the products."
Q:
What flow rate is the VIQUA VH410M designed for?
A:
It is rated for up to 18 GPM under the manufacturer’s specified conditions. Size the system to peak simultaneous flow, not average daily use.
Q:
What plumbing and power does it require?
A:
It uses 3/4-inch and 1-inch NPT combination connections and operates from 100–240 V, 50–60 Hz power unless the selected configuration states otherwise. Confirm bypass, drainage, and service clearance.
Q:
Does the VIQUA VH410M include UV output monitoring?
A:
Yes. The M model includes a UV sensor for real-time output monitoring.
Q:
Where should the system be installed?
A:
Install it indoors in the orientation permitted by the manual, after appropriate sediment filtration and any other upstream treatment needed to keep water conditions within specification.
Q:
What routine maintenance is required?
A:
Replace the lamp on schedule, inspect and service the quartz sleeve and seals, and maintain upstream filters. Respond to controller alarms rather than relying on visible lamp glow.
Q:
Which service parts should I plan for?
A:
Plan for the S410RL-HO lamp, QSO-410 sleeve or QL-410 kit, seals, and 254NM-C1 sensor service parts.
