Lámpara UV Aqua Flo RL-820 con llave 40040015, compatible con Genesis GEN 4-10, 5-10, 6-10
Lámpara UV Aqua Flo RL-820 con llave 40040015, compatible con Genesis GEN 4-10, 5-10, 6-10
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
La lámpara de repuesto Aqua Flo RL-820 mantiene los sistemas UV Genesis GEN 4-11, GEN 5-10 y GEN 6-10 funcionando a su nivel de diseño. Su tubo de cuarzo de 39 vatios y 820 mm (32.3 pulgadas) está clasificado para 9000 horas de producción constante, aproximadamente un año de uso doméstico normal. Una robusta base de cerámica verde de cuatro pines asegura una alineación perfecta dentro del reactor, mientras que la llave de reinicio incluida borra la cuenta regresiva del controlador después de la instalación. Cada lámpara se envía con una funda de espuma dentro de una caja de cartón reforzada de 36 × 5 × 5 pulgadas para llegar intacta y lista para un servicio rápido y sin herramientas. Reemplace anualmente para mantener un rendimiento fiable del sistema.
NOTA: Las lámparas de repuesto AquaFlo Genesis RL-820 están diseñadas solo para su uso en sistemas UV AquaFlo Genesis. No recomendamos que intente utilizar lámparas de repuesto AquaFlo Genesis en modelos fabricados por otros fabricantes.
Customer Reviews
Frequently Asked Questions
Q:
Which Genesis systems fit Aqua Flo lamp 40040015?
A:
The approved fit list is Genesis GEN 4-11, GEN 5-10 and GEN 6-10. Some listings incorrectly show GEN 4-10, so verify the model label on the chamber and the 40040015 part number before ordering.
Q:
Is a reset key included with the RL-820 lamp?
A:
Yes. This replacement includes the lamp reset key used to acknowledge the annual lamp change on compatible Genesis controllers.
Q:
What are the lamp specifications?
A:
The RL-820 is a 39-watt lamp approximately 820 mm, or 32.3 inches, long with a green four-pin ceramic base. Match the base, length and part number to the existing lamp.
Q:
How often should Aqua Flo 40040015 be replaced?
A:
Replace it after approximately 9,000 hours, normally once every 12 months. The lamp can continue glowing after its effective output has declined, so use the controller timer rather than visible light as the service indicator.
Q:
Do I need to replace the quartz sleeve with the lamp?
A:
The lamp and sleeve are separate parts. Inspect and gently remove mineral deposits from the sleeve during lamp service, and replace the sleeve if it is cracked, permanently clouded or cannot be restored.
Q:
Why is the key needed after lamp installation?
A:
The key resets or confirms the lamp-life countdown on compatible Genesis controls. Installing the lamp without completing the controller reset can leave the maintenance alarm active even when the new lamp is operating.
