VERY GOOD QUALITY
"VERY GOOD QUALITY"
Membrana de OI AXEON HF1-4021 150 PSI 1000 GPD 200378
Q&As
Membrana de OI AXEON HF1-4021 150 PSI 1000 GPD 200378
Q&As
Part Number:
200378
Alt Part Number:
LE-4021
ESPA1-4021
RE4021-BLN
RE4021-BLF
...
close
Membrana de ósmosis inversa comercial genuina AXEON de 1000 GPD con capacidad para 150 PSI, diseñada para una producción fiable del sistema.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
SHIPS IN 3-5 DÍAS HÁBILES
Descripción
La membrana de OI HF1-4021 de Axeon original mide 4 pulgadas por 21 pulgadas y se utiliza en los siguientes sistemas de OI comerciales:
- RO Systems International COM800S
- RO Systems International COM-II-800S
Las membranas de OI de la serie HF1 de AXEON ofrecen fiabilidad, alto rendimiento y resultados consistentes para aplicaciones comerciales. Todas las membranas se envían secas para una vida útil indefinida, se prueban al 100% en cuanto a la integridad al vacío y también se pueden pedir probadas individualmente en húmedo.
Specs
- Reemplace cada 24 meses
- Caudal: 1000 galones por día
- Dimensiones: 21" x 3,95"
Features
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
VERY GOOD QUALITY
"VERY GOOD QUALITY"
Q&A
Q:
What is the rated output of the AXEON HF1-4021 / 200378?
A:
It is rated for up to 1000 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-4021 / 200378?
A:
The catalog does not provide an approved model list for AXEON HF1-4021 / 200378. Match the exact part number, dimensions, connection style, and equipment generation before ordering.
Q:
What should I verify before ordering?
A:
Match the exact part number and 4-by-21-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
