Membrana OI AXEON HF1-2514 150 PSI 225 GPD 200374
Membrana OI AXEON HF1-2514 150 PSI 225 GPD 200374
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
La membrana de OI HF1-2514 genuina de Axeon mide 2.5 por 14 pulgadas. Las membranas de OI de la serie HF1 ofrecen fiabilidad, alto rendimiento y resultados consistentes para aplicaciones comerciales. Todas las membranas de ósmosis inversa se envían secas para una vida útil indefinida, se prueban al 100% en cuanto a la integridad del vacío y también se pueden pedir probadas individualmente en húmedo.
Para usar en los siguientes sistemas comerciales de OI:
- Sistemas de OI International COM150S
- Sistemas de OI International COM-II-150S
- Reemplace cada 24 meses
- Caudal: 225 galones por día
- Dimensiones: 14" x 2,4"
Q:
What is the rated output of the AXEON HF1-2514 / 200374?
A:
It is rated for up to 225 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-2514 / 200374?
A:
The catalog lists: HF1-2514, COM-II-150S, COM150S. Confirm the exact model and part number on your equipment before ordering AXEON HF1-2514 / 200374.
Q:
What should I verify before ordering?
A:
Match the exact part number and 2.5-by-14-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
