great new membrane
"we are getting lots of great clean water again"
Membrana de Ósmosis Inversa AXEON HF1-4014 150 PSI 600 GPD 200377
Q&As
Membrana de Ósmosis Inversa AXEON HF1-4014 150 PSI 600 GPD 200377
Q&As
Part Number:
200377
Alt Part Number:
LE-4014
ESPA1-4014
Membrana de ósmosis inversa comercial AXEON original de 600 GPD con clasificación de 150 PSI, diseñada para una salida fiable del sistema.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
SHIPS IN 3-5 DÍAS HÁBILES
Descripción
La membrana de OI HF1-4014 genuina de Axeon mide 4 pulgadas por 14 pulgadas y se utiliza en los siguientes sistemas de OI comerciales:
- RO Systems International COM450S
- RO Systems International COM-II-450S
Las membranas de OI de la serie HF1 de AXEON ofrecen fiabilidad, alto rendimiento y resultados consistentes para aplicaciones comerciales. Todas las membranas se envían secas para una vida útil indefinida, se prueban al 100 % con integridad al vacío y también se pueden solicitar con pruebas individuales en húmedo.
Specs
- Reemplace cada 24 meses
- Caudal: 600 galones por día
- Dimensiones: 14" x 3,95"
Features
This Item Fits These Select Systems
Overall rating: 4.5 / 5 from 2 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["filters"].
Review highlights
Reviews
great new membrane
"we are getting lots of great clean water again"
Good filter at a good price
"this was a good filter for a good price, direct fit and easy change out."
Q&A
Q:
What is the rated output of the AXEON HF1-4014 / 200377?
A:
It is rated for up to 600 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-4014 / 200377?
A:
The catalog lists: HF1-4014, COM-II-450S, COM450S. Confirm the exact model and part number on your equipment before ordering AXEON HF1-4014 / 200377.
Q:
What should I verify before ordering?
A:
Match the exact part number and 4-by-14-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
