Kit de reemplazo de filtro de ósmosis inversa AXEON HYDRO 750 con membrana de ósmosis inversa
Kit de reemplazo de filtro de ósmosis inversa AXEON HYDRO 750 con membrana de ósmosis inversa
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Kit de filtro de repuesto con membrana de ósmosis inversa para sistemas de ósmosis inversa AXEON HYDRO 750 de 5 etapas y 750 GPD
INCLUYE:
- ETAPA 1 - 1 filtro de sedimento EZ-Twist (212254) - Reemplazar cada 6 meses o según sea necesario
- ETAPA 2 y 3 - 2 filtros de carbón EZ-Twist (212253) - Reemplazar cada 6 meses o según sea necesario
- ETAPA 4 y 5 - 2 filtros de carbón EZ-Twist (212253) - Reemplazar cada 12 meses o según sea necesario
¡El mantenimiento del sistema de ósmosis inversa Hydro 750 es sencillo! Cuando el controlador indica un cambio, solo tiene que girar para sacar los cartuchos viejos y girar para colocar los nuevos, sin herramientas, sin procedimiento de apagado, sin llamada de servicio. Este es el juego completo, en stock y listo para enviar.
Qué incluye el kit
- Etapa 1 — Filtro de sedimentos (212254), 1 unidad, reemplazar cada 6 meses
- Etapas 2 y 3 — Filtros de carbón (212253), 2 unidades, reemplazar cada 6 meses
- Etapas 4 y 5 — Membranas de ósmosis inversa (212269), 2 unidades, reemplazar cada 12 meses
El ciclo de cambio alternativo
Las membranas duran el doble que el carbón y los sedimentos. Utilice este kit completo con un cambio cada 12 meses, luego cada 6 meses entre medias; pida el Kit de filtro de ósmosis inversa AXEON Hydro 750 — Membrana no incluida: filtro de sedimentos más dos de carbón, sin membranas. La alternancia significa que nunca tirará membranas que aún tienen vida útil.
Piezas originales de AXEON
Estos son cartuchos de repuesto originales de AXEON para el Sistema de ósmosis inversa AXEON Hydro 750, suministrados por ESP Water Products, un distribuidor autorizado de AXEON.
Helpful Info & Downloads
Q:
Which reverse osmosis system does the AXEON YSM-HYDRO750 filter kit fit?
A:
The YSM-HYDRO750 kit is assembled specifically for the AXEON HYDRO 750 five-stage, 750 GPD reverse osmosis system. The catalog fit record for this SKU lists HYDRO 750 only. Confirm the system model before ordering because AXEON HYDRO cartridges and membranes are not universal replacements for other RO systems.
Q:
What filters and membranes are included in the YSM-HYDRO750 kit?
A:
This complete five-stage service kit includes one AXEON 212254 EZ-Twist sediment filter for Stage 1, two AXEON 212253 EZ-Twist carbon filters for Stages 2 and 3, and two AXEON 212263 RO membranes for Stages 4 and 5. It replaces all five filtration elements in the AXEON HYDRO 750; housings, valves, tubing, and other system hardware are not included.
Q:
What is the difference between YSM-HYDRO750 and YS-HYDRO750?
A:
YSM-HYDRO750 is the full replacement kit and includes the two RO membranes in addition to the sediment and carbon filters. YS-HYDRO750 contains only the one sediment filter and two carbon filters, leaving the existing membranes in place. Choose YSM-HYDRO750 when the membranes are also due; choose YS-HYDRO750 for the more frequent prefilter-only service.
Q:
How often should the AXEON HYDRO 750 filters and RO membranes be replaced?
A:
AXEON publishes a 3–6 month interval for the EZ-Twist sediment and carbon cartridges and a 6–12 month interval for the RO membranes. Actual timing depends on feed-water quality, production volume, pressure, and the HYDRO 750 controller’s service indication. A practical schedule is to use the prefilter-only kit between full services, then use YSM-HYDRO750 when both prefilters and membranes are due.
Q:
Are all five replacements in YSM-HYDRO750 installed the same way?
A:
No. The sediment and carbon cartridges use the keyed EZ-Twist connection: match each cartridge to its labeled head, push it up, and rotate it into place. The two RO membranes install inside the membrane housings, which must be opened and reassembled according to the HYDRO 750 manual. Lubricate the membrane O-rings with food-grade silicone, seat each membrane fully, and check every connection for leaks after startup.
Q:
Will installing YSM-HYDRO750 restore the system to 750 GPD?
A:
Fresh filters and membranes can address restriction, fouling, or declining rejection caused by exhausted elements, but they do not guarantee 750 GPD. HYDRO 750 production also depends heavily on inlet pressure, water temperature, TDS, and pretreatment. If output remains low after replacement, compare the feed conditions with AXEON’s operating limits and review the controller readings before assuming the new elements are defective.
