AXEON SDF-45-1005 Filtro de sedimentos 5 micras 4.5" x 10" 200635
AXEON SDF-45-1005 Filtro de sedimentos 5 micras 4.5" x 10" 200635
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
El filtro de sedimentos AXEON SDF-45-1005 está diseñado para reducir las partículas de sedimentos de hasta 5 micras del agua. La densidad aumenta desde la superficie exterior hacia el centro, lo que permite mayores caudales y una capacidad superior de retención de suciedad.
- Clasificación de micras: 5 micras
- Dimensiones: 9,75" X 4,5"
- Reemplace cada 6-12 meses
Q:
What does the AXEON SDF-45-1005 / 200635 reduce?
A:
It reduces sand, silt, rust, dirt, and other suspended particles down to a nominal 5-micron level. It does not replace a carbon cartridge or RO membrane because it is designed for particulate filtration.
Q:
What housing or systems accept the AXEON SDF-45-1005 / 200635?
A:
The catalog lists SDF-45-1005, AT-1000, AT-500. Check the exact model or part number on the existing equipment before ordering AXEON SDF-45-1005 / 200635. The cartridge size is 4.5-by-10-inch, so the housing must also match that format.
Q:
How does the depth-loading polypropylene design help?
A:
The media captures larger particles toward the outside and progressively finer particles deeper in the cartridge. This provides useful dirt-holding capacity while helping maintain flow.
Q:
How often should this sediment filter be changed?
A:
A typical interval is 3 to 12 months, but source-water sediment, water use, and pressure drop determine actual life. Replace it sooner if flow declines or the cartridge becomes heavily loaded.
Q:
Can the AXEON SDF-45-1005 / 200635 be used before an RO or UV system?
A:
Yes, when the size and micron rating match the equipment. Sediment pre-filtration helps limit particle loading on downstream filters, membranes, and UV chambers.
Q:
How do I know whether 5 microns is the right rating?
A:
Choose the rating specified by the equipment manufacturer. A finer cartridge captures smaller particles but may load sooner, so do not substitute a different micron rating without confirming acceptable flow and pressure drop.
