Filters and Membranes
"Freeman was a great salesman, very knowledgeable and helpful. I will be bringing my business here again hands down."
AXEON SDF-45-2001 Filtro de sedimentos 1 micra 4.5" x 20" 200639
Q&As
AXEON SDF-45-2001 Filtro de sedimentos 1 micra 4.5" x 20" 200639
Q&As
Part Number:
200639
El filtro de sedimentos finos reduce las partículas hasta 1 micra para proteger las membranas de ósmosis inversa y los componentes del sistema.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Descripción
El filtro de sedimentos AXEON SDF-45-2001 está diseñado para reducir las partículas de sedimentos de hasta 1 micra de su agua. La densidad aumenta desde la superficie exterior hacia el centro, lo que permite mayores caudales y una capacidad superior de retención de suciedad.
Specs
- Clasificación de micras: 1 micras
- Dimensiones: 20" X 4,5"
- Reemplace cada 6-12 meses
Features
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Filters and Membranes
"Freeman was a great salesman, very knowledgeable and helpful. I will be bringing my business here again hands down."
Q&A
Q:
What does the AXEON SDF-45-2001 / 200639 reduce?
A:
It reduces sand, silt, rust, dirt, and other suspended particles down to a nominal 1-micron level. It does not replace a carbon filter or RO membrane.
Q:
Which housings or systems accept the AXEON SDF-45-2001 / 200639?
A:
The catalog lists these compatible parts or systems: SDF-45-2001, CT-4000, CT-5000, CT-7000. Confirm the exact model number on your equipment before ordering AXEON SDF-45-2001 / 200639. Its nominal size is 4.5 by 20 inches.
Q:
Why use a graded-density sediment filter?
A:
The depth-loading media captures larger particles near the outside and progressively finer particles deeper in the cartridge, improving dirt-holding capacity while helping maintain flow.
Q:
How often should this sediment filter be replaced?
A:
A typical interval is 3 to 12 months. Replace it sooner if flow or pressure drops, or if the cartridge becomes heavily loaded.
Q:
Can it be installed before an RO or UV system?
A:
Yes, when the size and micron rating match the equipment. Sediment pre-filtration helps limit particle loading on downstream filters, membranes, and UV chambers.
Q:
Is a finer micron rating always better?
A:
Not necessarily. Finer media captures smaller particles but can load sooner and create more pressure drop. Use the rating specified for the equipment and source-water conditions.
