The equipment continues to work
"The equipment continues to work flawlessly"
AXEON TE-3012-500 Membrana RO 500 GPD 70 PSI 3" x 12" 211665
Q&As
AXEON TE-3012-500 Membrana RO 500 GPD 70 PSI 3" x 12" 211665
Q&As
Part Number:
211665
Alt Part Number:
TF-3012-500
208802
La membrana compacta de ósmosis inversa ofrece hasta 500 GPD con un rendimiento eficiente a una menor presión de funcionamiento.
Read More
IN STOCK
Descripción
La membrana de OI TE-3012-500 (208802) de AXEON requiere una presión mínima de agua de entrada de 70 psi con un TDS máximo de 250 ppm. Este elemento de membrana ofrece fiabilidad, alto rendimiento y resultados consistentes para aplicaciones comerciales ligeras sin bomba. Todas las membranas se envían secas para una vida útil indefinida, se prueban al 100 % de integridad al vacío y también se pueden pedir probadas individualmente en húmedo. La membrana está diseñada para adaptarse a carcasas de membrana de OI de 12" x 3" como la carcasa de membrana de OI AXEON 208438.
Specs
- Caudal: 500 galones por día
- Dimensiones: 12" x 3"
- Reemplace cada 24 meses
Features
Overall rating: 4.6666665 / 5 from 3 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
The equipment continues to work
"The equipment continues to work flawlessly"
Nice
"Nice"
It was a gift for
"It was a gift for my son. He really liked it!"
Q&A
Q:
What is the rated production of the AXEON TE-3012-500 / 211665?
A:
The membrane is rated for up to 500 gallons per day under its specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Which systems does the AXEON TE-3012-500 / 211665 fit?
A:
The catalog lists TE-3012-500, LP-350, LP-500, LP-700. Check the exact model or part number on the existing equipment before ordering AXEON TE-3012-500 / 211665.
Q:
What size and configuration should I verify?
A:
Confirm the existing part number and the 3-by-12-inch commercial element format before ordering. Also match the housing or twist-in head, seals, and any required flow-control components. AXEON specifies at least 70 psi inlet pressure and feedwater up to 250 ppm TDS for the stated operating condition.
Q:
How often should this RO membrane be replaced?
A:
A common interval is about 24 months, but incoming water quality, prefilter maintenance, and water use affect service life. Test product-water TDS and replace sooner if rejection or production declines.
Q:
Does a higher GPD rating always mean better performance?
A:
No. The membrane rating must match the system design, pressure, flow restrictor, and storage configuration. Installing a different capacity can upset the permeate-to-drain balance.
Q:
What should I do after installing a new RO membrane?
A:
Confirm all seals and tubing connections, restore water slowly, check for leaks, and follow the system instructions for flushing before using the product water.
