Membrana RO compatible Culligan M-T1812AC36 36 GPD
Membrana RO compatible Culligan M-T1812AC36 36 GPD
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Applied Membranes M-T1812AC36 es una membrana de RO compatible con Culligan que es compatible con varios sistemas de RO, incluidos los sistemas de RO Culligan H-8, H-83, AC-15 y AC-30. Los números de pieza alternativos incluyen ACT-36, TFM-36-A y 1224436.
- Caudal: 36 galones por día
- Dimensiones: 11,75" X 1,8"
- Reemplace cada 24 meses
Q:
Which RO systems fit the M-T1812AC36 membrane?
A:
The catalog-approved Fits value lists: M-T1812AC36, AC-30, H-83. Match the exact system label and part number before ordering M-T1812AC36.
Q:
How much water can this membrane produce?
A:
It is rated for up to 36 gallons per day under specified test conditions. Actual output changes with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Is this an original Culligan membrane?
A:
It is sold as a compatible replacement, not as a Culligan-branded membrane. Match the membrane format, seal position, and part number to the installed system.
Q:
Do I need to change the flow restrictor with this membrane?
A:
Use the restrictor specified for a 36 GPD membrane and the system design. A mismatched restrictor can reduce recovery, output, or membrane life.
Q:
How can I tell when the membrane needs replacement?
A:
Monitor product-water TDS, rejection rate, production rate, and refill time after confirming prefilters and feed pressure are in good condition. A common interval is about two years, but water quality and use vary.
Q:
What should I do after installation?
A:
Seat the brine seal in the correct direction, reconnect tubing, restore pressure slowly, check for leaks, and flush and discard initial product water according to the RO-system instructions.
