A huge advantage
"This tool gives you a huge advantage when unscrewing tight filter cartridge cannisters which are mounted close to the wall and so hard to get your hands around to turn."
Llave para carcasa de filtro 1/2 círculo para carcasas estándar PFW190
Q&As
Llave para carcasa de filtro 1/2 círculo para carcasas estándar PFW190
Q&As
Part Number:
PFW190
La llave de carcasa de filtro permite retirar y apretar fácilmente el mantenimiento de las carcasas de filtro estándar de 10 pulgadas.
Read More
IN STOCK
Descripción
Esta llave ayudará a quitar y colocar carcasas estándar de 10" (5" de diámetro) al cambiar los cartuchos de filtro.
This Item Fits These Select Systems
Overall rating: 4.6923075 / 5 from 13 reviews.
AI Generated Review Summary
Summary topics
Review topics: [tool].
Review highlights
Reviews
A huge advantage
"This tool gives you a huge advantage when unscrewing tight filter cartridge cannisters which are mounted close to the wall and so hard to get your hands around to turn."
Thanks Good
"Thanks Good"
tool
"a tool"
While it eventually worked, it
"While it eventually worked, it was tricky to find the right spot to loosen the filter."
Great tool
"Made filter replacement easy."
Good but...
"This wrench worked for the purpose of opening my RO filter housings, but was not easy to use. It is made to latch on to a ridge on the housing so that you can pull it towards you with the handle so that the housing loosens. This is challenging because the housings are sealed tighter than a normal hand tightening because of the vacuum seal that is created because of the pressure build up, even though you've released as much pressure as possible prior. The tool can, and does slip off if the housing is super tight. But with the right angle and enough (seriously) elbow grease and tries, it gets the job done. If the tool were a bit thicker in it's width makeup (or density) it might be easier to use."
Worked great!
"Worked great!"
We have not used it
"We have not used it yet but assume it will work as your representative told me."
Just what I needed sturdy
"Just what I needed sturdy"
Simple to use and priced
"Simple to use and priced reasonable"
Q&A
Q:
What housing does the PFW190 wrench fit?
A:
The catalog lists: PFW190, RO 1:1 Water Conserver. Confirm the exact model or part number on your equipment before ordering PFW190 wrench. It is designed around many standard nominal 10-inch housings with an outside diameter near 5 inches; match the housing diameter and rib pattern.
Q:
What is the wrench used for?
A:
It provides leverage for loosening a housing sump during filter changes and may assist with hand-snug reassembly as directed.
Q:
Should I use the wrench to fully tighten a housing?
A:
No. Seat and hand-tighten the sump as instructed. Overtightening can damage the housing, distort the O-ring, or make future service difficult.
Q:
What should I do before loosening the housing?
A:
Shut off water, relieve pressure, open a faucet as appropriate, and support the sump before turning it.
Q:
Will this wrench correct a housing leak?
A:
No. Inspect the O-ring, groove, threads, cap, and sump for debris or damage; the wrench is only a service tool.
Q:
How do I confirm the correct wrench?
A:
Match the part number and housing style rather than relying on color. Similar-looking wrenches can have different diameters and engagement tabs.
