UF22 Sump Slimline Wrench
"Fits perfectly"
Pentair SW-2 150295 Llave de filtro para carcasas estándar de 10" y 20"
Q&As
Pentair SW-2 150295 Llave de filtro para carcasas estándar de 10" y 20"
Q&As
Part Number:
150295
La llave para carcasa de filtro se adapta a carcasas estándar de 10 y 20 pulgadas para simplificar los cambios de cartucho y el mantenimiento.
Read More
IN STOCK
Descripción
Esta llave ayudará a quitar y colocar carcasas estándar de 10" y 20" (5" de diámetro) al cambiar los cartuchos de filtro. La herramienta es compatible con la mayoría de las carcasas de filtros estándar para toda la casa.
Overall rating: 5.0 / 5 from 4 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
UF22 Sump Slimline Wrench
"Fits perfectly"
Great
"Great"
Filter Housing Wrench
"Good, sturdy, usable wrench."
Filter Housing Wrench for 10" & 20" Standard Housings (150295),
"Great help to change filters"
Q&A
Q:
Which filter housings is the Pentair SW-2 150295 designed to fit?
A:
Use it with the 10-inch and 20-inch standard housings described on the product page. The catalog has no model-specific Fits value, so verify the sump profile before ordering.
Q:
Does housing length affect whether this wrench fits?
A:
It is intended for 10-inch and 20-inch standard housings. Housing diameter and cap profile are the critical fit points; a 10-inch and 20-inch housing in the same series can use the same wrench.
Q:
How should I use the wrench without damaging the housing?
A:
Shut off the water, open a downstream faucet, and fully relieve pressure first. Support the housing head, keep the wrench square on the sump, and apply steady force rather than impact.
Q:
Should I tighten the housing with the wrench?
A:
Hand-tighten the sump and follow the housing instructions. A wrench is mainly for loosening a stuck sump; using it as a torque handle can overtighten the housing or distort the O-ring seal.
Q:
Why might the wrench slip even if the housing looks similar?
A:
Similar housings can have different outside diameters, ribs, and cap shapes. The Shopify page describes the applicable standard-housing body as approximately 5 inches in diameter. Match the housing series and wrench part number rather than cartridge size alone.
Q:
What else should I inspect during a filter change?
A:
Clean the housing groove, inspect the O-ring for cuts or flattening, apply only approved silicone lubricant if needed, reinstall the cartridge correctly, and check for leaks after repressurizing.
