Membrana OI de agua salobre Veolia (Suez) AG8040F-400, 11000 GPD, 8"x40"
Membrana OI de agua salobre Veolia (Suez) AG8040F-400, 11000 GPD, 8"x40"
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Las membranas RO de la serie WTS AG de Suez son ideales para la filtración de agua salobre y del grifo, así como para entornos industriales desafiantes. Las membranas de agua salobre estándar AG establecen el estándar de la industria con altas tasas de rechazo, bajas presiones operativas y mayores ahorros de energía.
- Caudal: 11.000 galones por día
- Presión máxima de funcionamiento: 600 psig
- Temperatura máxima de funcionamiento: 122 °F (50 °C)
- Dimensiones: 40" X 8"
- Envoltura exterior: Fibra de vidrio
- Reemplace cada 1-2 años o según sea necesario
Customer Reviews
Frequently Asked Questions
Q:
What is the rated production of the Veolia AG8040F-400?
A:
It is rated for up to 11000 gallons per day under specified test conditions. Actual output varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the Veolia AG8040F-400?
A:
The catalog does not provide an approved model list for Veolia AG8040F-400. Match the exact part number plus the component’s dimensions, connections, and electrical or performance specifications before ordering.
Q:
What should I verify before ordering?
A:
Match the exact part number and 8-by-40-inch brackish-water element, including element dimensions, seal arrangement, permeate connection, and required flow control. Commercial performance depends on the manufacturer’s test pressure and feedwater conditions; size the array from a proper system projection.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production, product-water TDS or conductivity, and pressure. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Membrane area and rated output must match the vessel, pressure, pump, recovery target, and flow-control arrangement.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
