Luminor RLQ-420HO Kit de lámpara UV y funda para LBH4-151, LBH5-151, LB6-151
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
El RLQ-420HO incluye la bombilla de repuesto UV, la funda de cuarzo que la acompaña y la llave de la lámpara para los sistemas de tratamiento de agua UV de alto rendimiento LUMINOR BLACKCOMB-HO LBH4-151, LBH5-151 y LBH6-151. Reemplazar la bombilla cada 12 meses es extremadamente importante para mantener la eficacia adecuada del sistema. La funda se puede reemplazar cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la eficacia de la lámpara.
Por qué es importante usar una lámpara LUMINOR genuina: Los sistemas y lámparas UV LUMINOR se prueban y certifican como una unidad completa. El uso de una lámpara LUMINOR auténtica garantiza el rendimiento adecuado del sistema. El uso de lámparas que no sean LUMINOR anula todas las certificaciones del sistema UV y puede comprometer su garantía si surge algún problema.
Overall rating: 5.0 / 5 from 1 reviews.
Review topics: [].
"Very pleased with the customer service! Our first order arrived completely smashed and we realized we had ordered the wrong unit. We took photos of the damage and a refund was promptly processed. We immediately ordered the correct unit. We've since installed it and it's working perfectly! Everything was promptly shipped! Much appreciated!"
Q:
What is the Luminor RLQ-420HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-420HO UV lamp, RQ-420 quartz sleeve, and installation key.
Q:
Why does this kit fit so many different system models?
A:
The RL-420HO lamp and RQ-420 sleeve are used across four separate Luminor product families that share the same chamber size — standard BLACKCOMB-HO -151 systems, low-UVT "-50" crossover models, rack-mounted Z-series systems, and Contractor Series systems — 22 model numbers in total, all using these identical parts.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-420HO lamp and RQ-420 quartz sleeve are each available on their own. The RLQ-420HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
How do I reset the lamp timer after installing this kit?
A:
On a 5.1 controller (the type that uses a lamp key), unplug the controller, remove the old lamp key, insert the new lamp key that comes with the RL-420HO, then plug the controller back in — the display should show 375 or 420 days. Other controller types reset with a button-hold sequence instead; see our how to replace a UV lamp guide for the full steps.
