Kit de lámpara y funda UV Luminor RLQ-600HO para LBH4-251, LBH5-251, LBH6-251
Kit de lámpara y funda UV Luminor RLQ-600HO para LBH4-251, LBH5-251, LBH6-251
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
El RLQ-600HO incluye la lámpara UV de repuesto, el manguito de cuarzo que la acompaña y la llave de la lámpara para los sistemas de tratamiento de agua UV LUMINOR BLACKCOMB LBH4-251, LBH5-251 y LBH6-251. Sustituir la lámpara cada 12 meses es extremadamente importante para mantener la eficacia adecuada del sistema. El manguito puede sustituirse cada 24 meses o según sea necesario para evitar que la acumulación de minerales dificulte la eficacia de la lámpara.
- Incluye RL-600HO y RQ-600
- Reemplace la lámpara cada 12 meses.
- Reemplace la funda cada 24 meses o cuando sea necesario.
Helpful Info & Downloads
Q:
What is the Luminor RLQ-600HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-600HO UV lamp, RQ-600 quartz sleeve, and installation key.
Q:
What does the "-50" suffix mean on some of these systems?
A:
It marks a low-UVT crossover configuration, built for source water with reduced UV transmittance (down to 50% instead of the standard 75% minimum). It uses the same RL-600HO lamp and RQ-600 sleeve as the standard systems — just tuned for different water conditions.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-600HO lamp and RQ-600 quartz sleeve are each available on their own. The RLQ-600HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
Does this kit work with the LBH4/5/6-251-TOC systems?
A:
No — TOC variants use a different lamp, the RL-600HO-TOC, even though they share the same RQ-600 sleeve as the systems in this kit's fitment list. Contact us if you need to source a lamp for a TOC system.
Q:
My system alarm says "Low UV Intensity" — what does that mean?
A:
This alarm usually points to water quality outside spec, or a sleeve or sensor that needs cleaning. Start by cleaning and drying the quartz sleeve and sensor and reinstalling them — if the alarm clears, that was the cause. If it persists, a water quality test can identify whether pre-filtration is needed, and our support team can help if the issue continues.
