Luminor Kit de lámpara UV y funda RLQ-850 para LB4-201, LB5-201, LB6-201
Luminor Kit de lámpara UV y funda RLQ-850 para LB4-201, LB5-201, LB6-201
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
El RLQ-850 incluye la lámpara UV de repuesto, el manguito de cuarzo que la acompaña y la llave de la lámpara para los sistemas de tratamiento de agua UV LUMINOR BLACKCOMB modelo LB4-201, LB5-201 y LB6-201. Reemplazar la lámpara cada 12 meses es extremadamente importante para mantener la eficacia adecuada del sistema. El manguito se puede reemplazar cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la eficacia de la lámpara.
Por qué es importante utilizar una lámpara LUMINOR genuina: Los sistemas y lámparas UV de LUMINOR se prueban y certifican como una unidad completa. El uso de una lámpara LUMINOR auténtica garantiza el rendimiento adecuado del sistema. El uso de lámparas que no son LUMINOR anula todas las certificaciones del sistema UV y puede comprometer su garantía si surge algún problema.
- Incluye RL-850 y RQ-850
- Reemplace la lámpara cada 12 meses
- Reemplace la funda cada 24 meses o según sea necesario
Helpful Info & Downloads
Q:
What is the Luminor RLQ-850 UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB UV water treatment systems, including a genuine RL-850 UV lamp, RQ-850 quartz sleeve, and installation key — everything needed to replace both wear parts in one order.
Q:
Is a UV bulb the same thing as the RL-850 lamp?
A:
Yes. "UV bulb" and "UV lamp" refer to the same part — the RL-850 is the UV lamp (sometimes called a UV bulb) included in this kit.
Q:
How often do I need to replace the lamp and sleeve?
A:
Luminor recommends replacing the RL-850 lamp every 12 months (or after 9,000 hours), and the RQ-850 sleeve every 24 months. Replacing both together on the lamp's schedule keeps UV output consistent and simplifies maintenance timing.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-850 lamp and RQ-850 quartz sleeve are each available on their own. The RLQ-850 kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
My system alarm says "Connection Failure" — what does that mean?
A:
This alarm usually means a module, sensor, or lamp key isn't securely connected, or a connection port is dirty or damaged. Unplug the controller, check that all connections (including the lamp key) are secure, then wait a minute before plugging it back in. If the alarm continues, contact Luminor support for further assistance.
