Customer service
"I’m very pleased with my experience when I recently called i to esp and asked for help in getting the right replacement filters for my home ro system. Tim was just so helpful and patient. Thank you again!"
Filtros RO compatibles PureValue 4EZ50 - Membrana no incluida
Q&As
Filtros RO compatibles PureValue 4EZ50 - Membrana no incluida
Q&As
Part Number:
YS-4EZ50
Kit de reemplazo de filtro de ósmosis inversa para sistemas PureValue 4EZ50, membrana de ósmosis inversa no incluida.
Read More
IN STOCK
Descripción
Kit de reemplazo de filtros para el sistema de ósmosis inversa PureValue 4EZ50 (membrana de ósmosis inversa vendida por separado)
INCLUYE:
- ETAPA 1 - 1x prefiltro de sedimentos (RW-SED2510050) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 2 - 1x prefiltro de bloque de carbón (OMB934-5m) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 3 - 0x (membrana de ósmosis inversa 200359 vendida por separado o con kit de reemplazo YSM-4EZ50) - Reemplazar cada 24 meses
- ETAPA 4 - 1x postfiltro de carbón en línea de 2" x 10" (K2533-JJ) - Reemplazar cada 6-12 meses o según sea necesario
Ofrecemos dos kits de filtros de reemplazo para que pueda obtener exactamente lo que necesita, y evitar pagar por filtros que no utiliza.
-
Kit del año 1 (incluye membrana de ósmosis inversa):
Ideal para su primer reemplazo completo, este kit incluye todos los filtros más la membrana de ósmosis inversa, que normalmente dura hasta 24 meses. -
Kit del año 2 que se encuentra en esta página (sin membrana de ósmosis inversa):
Después del primer año, solo necesita reemplazar los prefiltros y postfiltros, ya que la membrana de ósmosis inversa todavía sirve para otro año. Este kit le ayuda a ahorrar dinero mientras mantiene su sistema funcionando como nuevo.
*Es posible que los filtros deban reemplazarse con más frecuencia de lo indicado, según los niveles de contaminantes del agua entrante y el volumen de agua que se esté tratando.
This Item Fits These Select Systems
Replacements & Add Ons
Replacements for This Item
View All System Parts
Stage 1
Filtro de sedimento Ready Water RW-SED2510050 5 micras 2.5" x 10"
Replace Every 12 Months
See Details
Stage 2
Filtro de bloque de carbón Omnipure OMB934-5m, 5 micras, 2,5" x 10"
Replace Every 12 Months
See Details
Stage 3
Membrana de ósmosis inversa AXEON TF-1812-50, 50 GPD 200359
Replace Every 24 Months
See Details
Stage 4
Omnipure K2533 GAC T33 Filtro en línea de carbón granular 2" x 10"
Replace Every 12 Months
See Details
Add Ons for This Item
Overall rating: 5.0 / 5 from 5 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["filters","tim"].
Review highlights
Reviews
Excellent product.
"I did have to look on your website on “how to sanitize the system” but otherwise it all went well👍"
they don't look like the
"they don't look like the right ones but I sent for the right model number"
works great
"This product perfectly serves the purpose."
4EZ50 filters
"Filters are great but the web site is really messed up. I received several emails from ESP saying that my order was incomplete, then it was complete, then shipped, then incomplete. they seem to be confused. Also at first it would not accept my Paypal???, had to put it on a credit card instead."
Q&A
Overall rating: 5.0 / 5 from 5 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["filters","tim"].
Review highlights
Reviews
Customer service
"I’m very pleased with my experience when I recently called i to esp and asked for help in getting the right replacement filters for my home ro system. Tim was just so helpful and patient. Thank you again!"
Excellent product.
"I did have to look on your website on “how to sanitize the system” but otherwise it all went well👍"
they don't look like the
"they don't look like the right ones but I sent for the right model number"
works great
"This product perfectly serves the purpose."
4EZ50 filters
"Filters are great but the web site is really messed up. I received several emails from ESP saying that my order was incomplete, then it was complete, then shipped, then incomplete. they seem to be confused. Also at first it would not accept my Paypal???, had to put it on a credit card instead."
Q&A
Q:
What filters does the PureValue 5EZ50 RO system use, and how often should they be replaced?
A:
The PureValue 5EZ50 uses a 5-stage setup: sediment, two carbon block filters, a 50 GPD TFC RO membrane, and a post-carbon polishing filter. Replace the pre-filters every 6–12 months and the RO membrane every 2–3 years depending on water quality. View compatible replacements on the PureValue 5EZ50 Filter Replacement page.
Q:
How do I order replacement filters for my PureValue RO drinking water filtration system?
A:
Start by clicking on the photo of your PureValue reverse osmosis drinking water system above. From there, you can add the needed filters to your cart. In some cases, you can save time by ordering all of the needed filters in one "filter kit". Keep in mind that the RO membrane usually only needs to be replaced every two years, while the sediment and carbon filters are replaced every 6-12 months, depending on water usage and water quality.
Q:
What are the benefits of a PureValue reverse osmosis drinking water system?
A:
PureValue under-sink RO systems can help improve the quality of your household's drinking water. With a PureValue RO system, you can filter out common contaminants such as heavy metals, pesticides, fluoride, sulfates, etc. that can be detrimental to health. Enjoy water that's not only refreshing but also free from many of the impurities commonly found in untreated tap water. Plus, your family may begin drinking more water once the taste and odor of water has improved. This investment can contribute directly to a healthier way of life.
Q:
How much purified water does the PureValue 5EZ50 produce each day?
A:
The PureValue 5EZ50 is rated at 50 gallons per day (GPD) under ideal conditions. Actual output may vary based on water pressure, temperature, and membrane condition. For consistent performance, replace filters on schedule using the PureValue 5EZ50 Replacement Kit.
Q:
How often should I replace PureValue RO filters?
A:
Pre-filters (sediment and carbon) should be replaced every 6–12 months, while the RO membrane lasts 2–3 years, depending on water quality. Timely replacements maintain flow rate and taste. Find compatible kits on the PureValue RO filters.
Q:
Which replacement kit fits my PureValue RO system?
A:
PureValue systems like the 4EZ50 and 5EZ50 use standard 10" filters, but each model has a specific kit. Check model numbers on your system label, then select the correct kit such as the PureValue 5EZ50 Filter Replacement Kit.
Q:
How do I know if my PureValue RO filters need replacing?
A:
Reduced water flow, off-taste, chlorine smell, or rising TDS levels are common signs that filters are due for replacement. If symptoms appear sooner than scheduled, replace pre-filters immediately. See troubleshooting tips in the RO Filter Change Guide.
Q:
Are PureValue replacement filters easy to install?
A:
Yes. Most PureValue RO systems use twist-off or wrench-style housings for simple DIY installation. Shut off water, relieve pressure, and swap filters following the steps in the RO filter installation instructions.
Q:
How do I confirm which PureValue RO filters are compatible with my system?
A:
Match filters by system model (e.g., 4EZ50, 5EZ50). If unsure, compare your system's filter configuration with ESP’s Identify My RO System tool to ensure correct sizing and membrane type.
Q:
What replacement filters do PureValue systems use?
A:
Most PureValue RO units use a sediment filter, two carbon filters, a post-carbon filter, and a 50 GPD TFC membrane. Complete filter sets are available in the RO Replacement Filters & Parts collection for convenient annual maintenance.
