Controlador UV VIQUA BA-VT/2 con cable de alimentación europeo "Schuko"
Controlador UV VIQUA BA-VT/2 con cable de alimentación europeo "Schuko"
Descripción
El controlador de repuesto BA-VT/2 se utiliza con los sistemas Sterilight SC1, SC1-DWS, SC2.5, SC2.5-DWS, SC4, SC4-DWS y VIQUA VT1, VT1-DWS, VT4 y VT4-DWS. . Este controlador está diseñado para clavijas europeas híbridas estilo "Schuko" (CEE-7/7).
- Convierte la fuente de alimentación nativa al voltaje necesario de 200-250 V.
- Monitorea los días hasta el próximo reemplazo de la lámpara
- Monitorea la funcionalidad de la lámpara
Q:
Which systems use the VIQUA BA-VT/2?
A:
The catalog lists: BA-VT/2, SC1, SC2.5, SC4, VT1, VT1-DWS, VT4-DWS, VT4-DWS11. Confirm the exact model and part number on your equipment before ordering VIQUA BA-VT/2.
Q:
What power connection does this controller use?
A:
This version uses a European Schuko CEE 7/7 cord and is intended for the controller’s listed European mains supply. Match the plug and electrical rating to the installation location.
Q:
Does the VIQUA BA-VT/2 include a UV lamp?
A:
Do not assume so. This is a replacement controller; verify current package contents and order the correct lamp separately if it is due.
Q:
What should I verify before ordering?
A:
Match the complete controller part number, system model, input voltage, plug style, lamp connector, and any alarm or accessory requirements.
Q:
Can a different regional controller be used with a plug adapter?
A:
Use the controller specified for the region and system. A mechanical plug adapter does not change voltage, frequency, grounding, approvals, or controller compatibility.
Q:
What should be checked after installation?
A:
Confirm the lamp starts, indicator and alarm functions operate normally, the lamp timer is set correctly, and any connected accessories respond as described in the manual.
