Lámpara UV VIQUA S740RL-4C para SHF-140 y SHFM-140
Lámpara UV VIQUA S740RL-4C para SHF-140 y SHFM-140
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Esta bombilla de repuesto con lámpara UV S740RL-4C es para los sistemas UV VIQUA SHF-140 y SHMF-180. Reemplazar la bombilla cada 12 meses es extremadamente importante para mantener la eficacia adecuada del sistema. El manguito debe reemplazarse cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la efectividad de la lámpara.
Por qué es importante usar una lámpara VIQUA genuina: Los sistemas y lámparas UV de VIQUA se prueban y certifican como una unidad completa. El uso de una lámpara VIQUA auténtica garantiza el rendimiento adecuado del sistema y el tratamiento del agua. Este video explica los 5 riesgos de las lámparas posventa que no son VIQUA y cómo identificar las lámparas VIQUA auténticas.
NOTA: El uso de lámparas que no son VIQUA anula todas las certificaciones del sistema UV y puede comprometer su garantía si surge un problema.
- Reemplace la lámpara cada 12 meses
Q:
Which systems use the VIQUA S740RL-4C lamp?
A:
The S740RL-4C is the approved replacement lamp for VIQUA SHF-140 and SHFM-140 systems. Confirm the complete part number, including the -4C suffix, because similar S740 lamp numbers fit different equipment.
Q:
How often should the S740RL-4C be replaced?
A:
Replace the lamp after approximately 9,000 operating hours, usually once every 12 months. Its UV output decreases with time even when the lamp still emits visible light.
Q:
Does the S740RL-4C include a quartz sleeve?
A:
No. This SKU is the replacement lamp only. Inspect the system's quartz sleeve during service and order the model-specific sleeve or lamp-and-sleeve kit separately if needed.
Q:
Can I touch the glass when installing this VIQUA lamp?
A:
Avoid touching the lamp glass with bare hands. Use clean gloves and remove accidental fingerprints with an appropriate lint-free cloth before installation, because residue can create hot spots and shorten lamp life.
Q:
Why does the controller still show a lamp reminder after replacement?
A:
The annual lamp timer must be reset according to the SHF/SHFM controller instructions. Also confirm each lamp connector is fully seated before restoring normal operation.
Q:
Should all lamps in a multi-lamp SHF system be serviced together?
A:
Follow the system's maintenance record and controller indications. Replacing lamps on the same annual schedule helps keep output consistent and makes it easier to track service across a multi-lamp chamber.
