Kit de filtro RO compatible con iSpring PH100 con membrana RO
Kit de filtro RO compatible con iSpring PH100 con membrana RO
Descripción
Este es el kit de filtro compatible para el sistema de filtración de agua potable por ósmosis inversa de 6 etapas iSpring PH100 pH+ bajo fregadero de 100 GPD.
INCLUYE:
- ETAPA 1 - 1x prefiltro de sedimentos (RW-SED2510050) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 2 - 1x prefiltro de carbón granular (OCB934RO T33) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 3 - 1x prefiltro de bloque de carbón (OMB934-5m) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 4 - 1x membrana RO TFC 100 GPD (200361) - Reemplazar cada 24 meses
- ETAPA 5 - 1x filtro de carbón GAC en línea (CL10ROT33-BB) - Reemplazar cada 6-12 meses o según sea necesario
- ETAPA 6 - 1x postfiltro de remineralización de 2" x 10" (K2548-BB) - Reemplazar cada 6-12 meses o según sea necesario
Todos los filtros enumerados son productos de ósmosis inversa de marca compatible. No vendemos filtros de la marca iSpring. Todos los nombres de marca, marcas comerciales y logotipos de iSpring son propiedad de iSpring.
Ofrecemos dos kits de filtros de repuesto para que pueda obtener exactamente lo que necesita y evitar pagar por filtros que no utiliza.
-
Kit Año 1 (mostrado aquí):
Ideal para su primer reemplazo completo, este kit incluye todos los filtros más la membrana de ósmosis inversa, que normalmente dura hasta 24 meses. -
Kit Año 2 (sin membrana de ósmosis inversa):
Después del primer año, solo necesita reemplazar los prefiltros y postfiltros, ya que la membrana de ósmosis inversa sigue siendo útil por otro año. Este kit le ayuda a ahorrar dinero mientras mantiene su sistema funcionando como nuevo.
Al ofrecer dos kits, facilitamos el seguimiento del cronograma de reemplazo recomendado y reducimos el desperdicio, para que solo compre lo que su sistema realmente necesita.
*Es posible que los filtros deban reemplazarse con más frecuencia de lo indicado, según los niveles de contaminantes del agua y el volumen de agua que se trate.
Replacements & Add Ons
Q:
How often should I replace my iSpring RO filters and membrane?
A:
How long your iSpring compatible filters and membrane last will depend on your household water useage and water quality. Reverse osmosis filters generally last 6-12 months, and the RO membrane about 2 years. Learn more about how to change your RO filters.
Q:
How do I order replacement filters for my iSpring RO system?
A:
Start by clicking on the photo of your iSpring system on https://espwaterproducts.com/collections/ispring-water-systems. From there, you can add the needed filters to your cart. In some cases, you can save time by ordering all of the needed filters in one "filter kit" (not available for all iSpring models).
Q:
What contaminants will iSpring Reverse Osmosis systems remove?
A:
iSpring filter systems can eliminate a broad spectrum of contaminants. Utilizing advanced filtration technologies, iSpring systems can effectively reduce common pollutants from water including pesticides, sulfates, fluoride, nitrates, lead, pharmaceuticals, arsenic and more. The RO system's carbon filter will also remove chloramines and chlorine.
Learn more about what contaminants can be removed with reverse osmosis filtration.
Q:
How often should I replace filters in my iSpring RO system?
A:
Most iSpring systems require sediment and carbon pre-filters every 6–12 months, a post-carbon filter annually, and the RO membrane every 2 years, depending on usage. Replacement schedules apply across popular models like the iSpring RCC7 and RCC7AK. For guidance, see ESP Water’s RO Filter Replacement Instructions.
Q:
Which replacement filter kits fit my iSpring RO model?
A:
Each iSpring system has a specific filter set. For example, the PH100 6-Stage and RO100 5-Stage use different replacement cartridges than the PureDrop RTW5. Always match your model number when selecting from ESP Water’s iSpring model pages.
Q:
How do I know which iSpring filters are compatible with my system?
A:
Locate your system’s model number, then match it to the correct replacement collection. ESP Water supports models ranging from the RCC7P Pumped RO System to the US31 3-Stage System. If unsure, use the Identify My RO System article to confirm compatibility.
Q:
What signs indicate my iSpring RO filters need replacing?
A:
Signs include slow water flow, poor taste or odor, cloudy water, or rising TDS levels. Slow flow is a common indicator of clogged pre-filters. For troubleshooting, see ESP Water’s article on Why RO Water Flow Is Slow, then choose replacements for your model (e.g., RCC7P-AK or RCC7).
Q:
Can I install iSpring RO replacement filters myself?
A:
Yes — iSpring systems are designed for DIY filter changes using standard housings and clear instructions. Shut off water, relieve pressure, and swap filters following the system manual. For general steps, visit ESP Water’s How to Change RO Filters & Membranes guide. Replacement filters are available for models like the WCB32C and WGB22B.
Q:
Are iSpring RO filters interchangeable with other filtration systems?
A:
Some iSpring systems use standard 10-inch cartridges, making them compatible with other RO brands, but always verify filter type and stage order. Systems such as the WGB12B or WGB21B use specific sediment and carbon formats. When in doubt, reference ESP Water’s Identify My System tool.
