Reasonable price; expeditious delivery.
"Product was delivered quickly at a competitive price."
Lámpara Luminor RL-950HO para sistemas UV LBH4-401, LBH5-401, LBH6-401
La lámpara UV de alta potencia RL-950HO es el repuesto y la llave para los sistemas de tratamiento de agua UV de alta potencia LUMINOR BLACKCOMB-HO LBH4-401, LBH5-401, LBH6-401.
La RL-950HO es una lámpara LUMINOR auténtica y tiene una vida útil de 10 000 horas. La luz UV-C emitida se debilitará con el tiempo, por lo que una vez que una lámpara alcanza las 10 000 horas (o cada 12 meses), es importante reemplazarla rápidamente.
Por qué es importante utilizar una lámpara LUMINOR original: Los sistemas UV y las lámparas LUMINOR se prueban y certifican como una unidad completa. El uso de una lámpara LUMINOR auténtica garantiza el rendimiento adecuado del sistema. El uso de lámparas que no son LUMINOR anula todas las certificaciones del sistema UV y puede comprometer su garantía en caso de que surja un problema.
Overall rating: 5.0 / 5 from 1 reviews.
Review topics: ["shipping","price"].
"Product was delivered quickly at a competitive price."
Overall rating: 5.0 / 5 from 1 reviews.
Review topics: ["shipping","price"].
"Product was delivered quickly at a competitive price."
Q:
How do I know if the RL-950HO is the right lamp for my system?
A:
Check the model number on your system's nameplate. The RL-950HO fits any Luminor BLACKCOMB-HO system ending in "-401": LBH4-401, LBH5-401, LBH6-401, LBH5-401B, LBH6-401B, LBH6-401A, and the low-UVT "-50" crossover models. If your model ends in a different number, like -251 or -151, you need a different lamp.
Q:
My system's nameplate says LBH4-402 instead of LBH4-401. Is the RL-950HO still the right lamp?
A:
Yes. The "-401" and "-402" model numbers are the same 40 GPM High Output system, just built for different electrical service: "-401" models run on 110V and "-402" models run on 230V. Both use the identical RL-950HO lamp and RQ-950 sleeve.
Q:
What does the "-50" suffix mean on models like LBH5-401-50?
A:
It marks a low-UVT crossover configuration, built for source water with reduced UV transmittance (rated to treat water at 50% UVT rather than the standard 75% minimum). These units serve water with more organic material or color, but they use the same RL-950HO lamp as the standard "-401" systems.
Q:
Is the 40 GPM BLACKCOMB-HO tier (LBH4-401, LBH5-401, LBH6-401) overkill for a home, or is it meant for commercial use?
A:
At 40 GPM, this is Luminor's largest standard BLACKCOMB-HO flow tier, well beyond what a typical household needs; ESP's sizing guide tops out residential recommendations around 18-21 GPM for a 5-plus bathroom home. The 40 GPM "-401" systems are built for large estates, agricultural operations, and light commercial sites with correspondingly higher peak water demand. If your home doesn't need that much throughput, the 25 GPM LBH4/5/6-251 tier (RL-600HO lamp) is a better fit.
Q:
What does a "Lamp Failure" alarm mean?
A:
It means the controller can't light the lamp. Unplug the system for at least 3 minutes, check that the lamp connector is fully seated, then plug it back in. If the alarm continues, replace the lamp. If a new lamp doesn't clear it, the controller itself may need service.
Q:
Will a non-Luminor replacement lamp work in my BLACKCOMB-HO system?
A:
It may physically fit, but Luminor systems are NSF/ANSI 55 certified as a complete lamp-and-system unit. A non-Luminor lamp voids that certification and can affect your warranty if an issue comes up.