Worked!
"No problems during installation."
VIQUA 410867 Junta tórica de repuesto para tuerca de retención RN-001
Q&As
VIQUA 410867 Junta tórica de repuesto para tuerca de retención RN-001
Q&As
Part Number:
410867
Alt Part Number:
RO-212
La junta tórica de repuesto original de VIQUA restablece el sellado adecuado para la tuerca de retención RN-001 en los sistemas UV.
Read More
IN STOCK
Descripción
Junta tórica para tuerca de retención RN-001 Las juntas tóricas de la SERIE SQ/SSM/SC/SCM/SP/SPV/VT/VH/VP crean un sello alrededor de los bordes de la lámpara para evitar daños por agua.
Overall rating: 4.6923075 / 5 from 13 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["shipping","service"].
Review highlights
Reviews
Worked!
"No problems during installation."
All products were exactly right
"All products were exactly right"
na
"na"
Fast shipping product as described
"Glass sleeve arrived intact!"
Fast shipping and the correct
"Fast shipping and the correct part."
Was exactly what was needed.
"Was exactly what was needed. easy to order and easy to get. Showed up quicker than expected."
Excellent product
"Excellent product"
Came on time
"Came on time"
Needed a little petroleum lubrication
"Needed a little petroleum lubrication to prevent small drip"
great
"great"
Q&A
Q:
What does the VIQUA 410867 O-ring seal?
A:
It seals the RN-001 retaining-nut and quartz-sleeve area on compatible VIQUA systems to help prevent water from reaching the lamp connection.
Q:
Which VIQUA models does the catalog list for this O-ring?
A:
The catalog lists PUV-8-P, PUV-16-P, VP600, VP600M, S80, VH410M, VP950M, VH410M-V, S1Q-PA, S8Q-PA, S12Q-PA, S2Q-PA, S5Q-DWS, S2Q-DWS, S5Q-PA, S2Q-P, and S2Q-PV. Each application must also use the RN-001 retaining nut.
Q:
Should the 410867 be inspected during lamp service?
A:
Yes. Inspect it whenever the lamp or quartz sleeve is serviced and replace it if cut, flattened, stretched, brittle, or unable to seat evenly.
Q:
Can an old O-ring be reused with a new quartz sleeve?
A:
Only if the VIQUA instructions permit reuse and the seal remains in excellent condition. Replacing a questionable seal is prudent before repressurizing the chamber.
Q:
Should lubricant be applied to this O-ring?
A:
Follow the VIQUA service instructions. If lubricant is specified, use only the recommended food-grade silicone product and a very light coating.
Q:
What should I do if the chamber leaks after service?
A:
Shut off water and power immediately, depressurize the system, and check sleeve position, retaining-nut alignment, and O-ring seating. Do not operate the UV system with water near electrical components.
