Kit de lámpara UV y funda Luminor RLQ-950HO para LBH4-401, LBH5-401, LBH6-401
Kit de lámpara UV y funda Luminor RLQ-950HO para LBH4-401, LBH5-401, LBH6-401
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
El RLQ-950HO incluye la bombilla de repuesto UV, la funda de cuarzo que la acompaña y la llave de la lámpara para los sistemas de purificación de agua UV LUMINOR LBH4-401, LBH5-401, LBH6-401. Es extremadamente importante reemplazar la bombilla cada 12 meses para mantener la eficacia adecuada del sistema. La funda se puede reemplazar cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la efectividad de la lámpara.
Por qué es importante utilizar una lámpara LUMINOR original: Los sistemas y lámparas UV LUMINOR se prueban y certifican como una unidad completa. El uso de una lámpara LUMINOR auténtica garantiza el rendimiento adecuado del sistema. El uso de lámparas que no son LUMINOR anula todas las certificaciones del sistema UV y puede comprometer su garantía si surge algún problema.
- Incluye RL-950HO y RQ-950
- Reemplace la lámpara cada 12 meses.
- Reemplace la funda cada 24 meses o cuando sea necesario.
Helpful Info & Downloads
Q:
What is the Luminor RLQ-950HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-950HO UV lamp, RQ-950 quartz sleeve, and installation key.
Q:
What's the difference between "-401" and "-402" systems?
A:
Nothing about the lamp or sleeve — the digit marks the electrical service the system runs on, 110V ("-401") versus 230V ("-402"). Both use the identical RL-950HO lamp and RQ-950 sleeve in this kit.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-950HO lamp and RQ-950 quartz sleeve are each available on their own. The RLQ-950HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
Does this kit work with the LBH4/5/6-401-TOC systems?
A:
No — TOC variants use a different lamp, the RL-950HO-TOC, even though they share the same RQ-950 sleeve as the systems in this kit's fitment list. Contact us if you need to source a lamp for a TOC system.
Q:
My system alarm says "Connection Failure" — what does that mean?
A:
This alarm usually means a module, sensor, or lamp key isn't securely connected, or a connection port is dirty or damaged. Unplug the controller, check that all connections (including the lamp key) are secure, then wait a minute before plugging it back in. If the alarm continues, contact Luminor support for further assistance.
