Funda de cuarzo UV Luminor RQ-1000 para LR5-852, LR6-852, LR5-1752, LR6-1752
Funda de cuarzo UV Luminor RQ-1000 para LR5-852, LR6-852, LR5-1752, LR6-1752
Descripción
El LUMINOR RQ-1000 es un manguito de cuarzo de repuesto para los sistemas UV LUMINOR LR5-852, LR6-852, LR5-1752, LR6-1752. El manguito de cuarzo evita que la lámpara UV sufra un cortocircuito y mantiene la temperatura de funcionamiento ideal de la lámpara.
La acumulación de minerales dificulta la eficacia de la lámpara y debe limpiarse regularmente. Los manguitos de cuarzo UV deben reemplazarse cuando están astillados, agrietados o permanecen descoloridos incluso después de la limpieza.
Garantía: Protección de garantía de reemplazo completa de un año, sin complicaciones.
- Reemplazar cada 24 meses o según sea necesario.
- Longitud: 44,68" (1135 mm)
- Estilo: Abierto
Helpful Info & Downloads
Más información del producto
Q:
Does the RQ-1000 fit the low-UVT and TOC versions of my system, or just the standard LR-851/LR-1751?
A:
It fits all of them. The low-UVT ("-50") and TOC variants of both the 85 GPM and 175 GPM tiers use the same chamber and sleeve as the standard systems; only the lamp and the system's internal dose settings change between variants.
Q:
How do I know if I need to clean the sleeve or replace it?
A:
Clean it if it's scaled or lightly stained; replace it if it's scratched, pitted, or stays cloudy after cleaning. Even with no visible damage, Luminor recommends replacing the sleeve every 24 months as routine maintenance, since UV-C transmission through quartz declines gradually with age.
Q:
Do I need to buy the lamp too, or can I just replace the sleeve?
A:
The RQ-1000 is the sleeve only. If your lamp is also due, pair it with the [RL-1000A](https://espwaterproducts.com/products/luminor-rl-1000a-uv-replacement-lamp) lamp, or save by ordering the [RLQ-1000A](https://espwaterproducts.com/products/luminor-rlq-1000a-uv-lamp-and-sleeve-kit-for-lr6-855-1755-lk6-a22-a42-a62) kit, which bundles both.
Q:
Can I use a non-Luminor sleeve instead of the RQ-1000?
A:
You can, but it's not recommended. Luminor certifies its systems as a complete lamp-chamber-sleeve unit, and a non-Luminor sleeve can differ in wall thickness or quartz quality, which reduces the UV-C dose reaching the water and can affect your warranty coverage.
Q:
Why does the sleeve need replacing on a different schedule than the lamp?
A:
The lamp is a wear part rated for 12,000 hours, so it's replaced on a fixed schedule (about every 12 months). The sleeve doesn't burn out the same way; it fouls from mineral scale and staining, which is why its replacement guidance is calendar-based (every 24 months) rather than hour-based.
