The equipment continues to work
"The equipment continues to work flawlessly"
AXEON TE-3012-500 RO Membrane 500 GPD 70 PSI 3" x 12" 211665
Q&As
AXEON TE-3012-500 RO Membrane 500 GPD 70 PSI 3" x 12" 211665
Q&As
Part Number:
211665
Alt Part Number:
TF-3012-500
208802
Compact RO membrane delivers up to 500 GPD with efficient performance at lower operating pressure.
Read More
IN STOCK
Description
AXEON's TE-3012-500 (208802) RO membrane requires a minimum of 70psi of incoming water pressure with a maximum TDS of 250ppm. This membrane element offers reliability, high performance and consistent results for pump-less light commercial applications. All membranes are shipped dry for indefinite shelf life, are 100% vacuum integrity tested and can also be ordered as individually wet tested. The membrane is designed to fit 12" x 3" RO Membrane Housings such as the AXEON 208438 RO Membrane Housing.
Specs
- Flow Rate: 500 Gallons Per Day
- Dimensions: 12" x 3"
- Replace every 24 months
Features
Overall rating: 4.6666665 / 5 from 3 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
The equipment continues to work
"The equipment continues to work flawlessly"
Nice
"Nice"
It was a gift for
"It was a gift for my son. He really liked it!"
Q&A
Q:
What is the rated production of the AXEON TE-3012-500 / 211665?
A:
The membrane is rated for up to 500 gallons per day under its specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Which systems does the AXEON TE-3012-500 / 211665 fit?
A:
The catalog lists TE-3012-500, LP-350, LP-500, LP-700. Check the exact model or part number on the existing equipment before ordering AXEON TE-3012-500 / 211665.
Q:
What size and configuration should I verify?
A:
Confirm the existing part number and the 3-by-12-inch commercial element format before ordering. Also match the housing or twist-in head, seals, and any required flow-control components. AXEON specifies at least 70 psi inlet pressure and feedwater up to 250 ppm TDS for the stated operating condition.
Q:
How often should this RO membrane be replaced?
A:
A common interval is about 24 months, but incoming water quality, prefilter maintenance, and water use affect service life. Test product-water TDS and replace sooner if rejection or production declines.
Q:
Does a higher GPD rating always mean better performance?
A:
No. The membrane rating must match the system design, pressure, flow restrictor, and storage configuration. Installing a different capacity can upset the permeate-to-drain balance.
Q:
What should I do after installing a new RO membrane?
A:
Confirm all seals and tubing connections, restore water slowly, check for leaks, and follow the system instructions for flushing before using the product water.
