Kit de lámpara UV y funda Luminor RLQ-210HO para LBH4-051, LBH5-051, LBH6-051
Kit de lámpara UV y funda Luminor RLQ-210HO para LBH4-051, LBH5-051, LBH6-051
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
El RLQ-210HO incluye la bombilla de lámpara UV de repuesto, la funda de cuarzo y la llave de lámpara para los sistemas de purificación de agua UV modelo LUMINOR LBH4-051, LBH5-051, LBH6-051. Es extremadamente importante reemplazar la bombilla cada 12 meses para mantener la eficacia adecuada del sistema. La funda se puede reemplazar cada 24 meses o según sea necesario para evitar que la acumulación de minerales obstaculice la eficacia de la lámpara.
Por qué es importante usar una lámpara LUMINOR original: Los sistemas y lámparas UV LUMINOR se prueban y certifican como una unidad completa. El uso de una lámpara LUMINOR auténtica garantiza el rendimiento adecuado del sistema. El uso de lámparas que no son LUMINOR anula todas las certificaciones del sistema UV y puede comprometer su garantía si surge un problema.
- Incluye RL-210HO y RQ-210
- Reemplace la lámpara cada 12 meses.
- Reemplace la funda cada 24 meses o cuando sea necesario.
Helpful Info & Downloads
Q:
What is the Luminor RLQ-210HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-210HO UV lamp, RQ-210 quartz sleeve, and installation key.
Q:
Does the RLQ-210HO use a different sleeve than the standard RLQ-210 kit?
A:
No — both kits use the identical RQ-210 quartz sleeve. Only the lamp is different: this kit includes the RL-210HO, while the standard RLQ-210 kit includes the RL-210.
Q:
Is a UV bulb the same thing as the RL-210HO lamp?
A:
Yes. "UV bulb" and "UV lamp" refer to the same part — the RL-210HO is the UV lamp (sometimes called a UV bulb) included in this kit.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-210HO lamp and RQ-210 quartz sleeve are each available on their own. The RLQ-210HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
My system alarm says "Lamp Failure" — what does that mean?
A:
This alarm means the lamp isn't lit. Unplug the system for at least 3 minutes, check that the lamp connector is securely attached, then plug it back in. If the alarm persists, replace the lamp — if a new lamp doesn't resolve it, contact Luminor support for further assistance.
