Funda de cuarzo UV de repuesto Luminor RQ-210 para LB4/5/6-021, LBH4/5/6-051
Funda de cuarzo UV de repuesto Luminor RQ-210 para LB4/5/6-021, LBH4/5/6-051
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Descripción
Este es un repuesto original de camisa de cuarzo Luminor Blackcomb RQ-210 para los sistemas de desinfección ultravioleta Luminor LB4-021, LB5-021, LB6-021, LBH4-051, LBH5-051, LBH6-051.
Esta camisa de cuarzo evitará que la lámpara UV RL-210 y RL-210HO sufra cortocircuitos y ayuda a mantener la temperatura de funcionamiento ideal de la lámpara UV.
La acumulación de minerales dificulta la eficacia de la lámpara y debe limpiarse con regularidad. Las camisas de cuarzo UV deben reemplazarse cuando estén astilladas, agrietadas o permanezcan descoloridas incluso después de la limpieza.
Garantía: Protección de garantía de reemplazo completa de un año, sin complicaciones.
- Reemplazar cada 24 meses o según sea necesario.
- Longitud: 256 mm (10,07 pulgadas)
- Estilo: abovedado
Helpful Info & Downloads
Overall rating: 0.0 / 5 from 0 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Q&A
Q:
Does the RQ-210 fit both my BLACKCOMB and BLACKCOMB-HO system?
A:
Yes. The RQ-210 is the correct sleeve for both the standard BLACKCOMB LB4/5/6-021 line and the BLACKCOMB-HO LBH4/5/6-051 line. They share the same chamber geometry, so one sleeve part number covers both, even though each line takes a different lamp (RL-210 or RL-210HO).
Q:
How do I know if I need to clean the sleeve or replace it?
A:
Clean it if it's scaled or lightly stained; replace it if it's chipped, cracked, or stays discolored/cloudy after cleaning. Even with no visible damage, Luminor recommends replacing the sleeve every 24 months as routine maintenance, since UV-C transmission through quartz declines gradually with age.
Q:
Why does the sleeve need replacing on a different schedule than the lamp?
A:
The lamp is a wear part rated for 9,000-10,000 hours, so it's replaced on a fixed schedule (about every 12 months). The sleeve doesn't burn out the same way; it fouls from mineral scale and staining, which is why its replacement guidance is calendar-based (every 24 months) rather than hour-based.
Q:
Can I use a non-Luminor sleeve instead of the RQ-210?
A:
You can, but it's not recommended. Luminor certifies its systems as a complete lamp-chamber-sleeve unit, and a non-Luminor sleeve can differ in wall thickness or quartz quality, which reduces the UV-C dose reaching the water and can affect your warranty coverage.
Q:
Do I need the lamp too, or just the sleeve?
A:
The RQ-210 is the sleeve only. If your lamp is also due, pair it with the [RL-210](https://espwaterproducts.com/products/luminor-rl-210-replacement-uv-lamp-for-lbh-201-lb5-201-lb6-201) (standard) or [RL-210HO](https://espwaterproducts.com/products/luminor-rl-210ho-replacement-uv-lamp) (High Output) lamp, or save by ordering the [RLQ-210](https://espwaterproducts.com/products/luminor-rlq-210-uv-lamp-and-sleeve-kit-for-lb4-201-lb5-201-lb6-201) or [RLQ-210HO](https://espwaterproducts.com/products/luminor-rlq-210ho-uv-lamp-and-sleeve-kit-for-lbh4-201-lbh5-201-lbh6-201) kit, which bundles both.
