100% great water.
"Have used these filters for 6 years with great results. Pure clean water."
Omnipure Q5672-50FC RO membrane 50 GPD with Flow Control
Q&As
Omnipure Q5672-50FC RO membrane 50 GPD with Flow Control
Q&As
Part Number:
TQ56-50FC
Alt Part Number:
TQ56-50FC-RY
Q5672
Encapsulated RO membrane with flow control provides reliable 50 GPD output for PuROTwist RO systems.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Description
Omnipure's Q5672-50FC or TQ56-50FC encapsulated membrane is compatible with both PuROTwist 4000 and PuROTwist 3000 Reverse Osmosis systems or any system that uses Omnipure Q-Series filters. It comes with a built-in flow restrictor and check valve and is easy to install.
Specs
- Flow Rate: 50 Gallons Per Day
- Dimensions: 12.75" X 2.5"
- Replace every 24 months
Features
This Item Fits These Select Systems
Overall rating: 4.8333335 / 5 from 24 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["shipping","service","filters","water"].
Review highlights
Reviews
100% great water.
"Have used these filters for 6 years with great results. Pure clean water."
Omnipure RO filter
"Best way to keep water filtered and tasting great."
RO membrane
"After I replaced it with water tasted great again I am very happy with This system"
The service was top-notch could
"The service was top-notch could not have asked for better. Freeman Linton was a great help."
Filters are good
"It would be great to come with installation instruction."
Easy to install and fixed
"Easy to install and fixed the water issue 🙂"
Good filter
"Easy to install and makes a big difference in the quality of our drinking water"
Easy to install. Affordable! Love
"Easy to install. Affordable! Love the emails to remind you to replace the filters. Fast shipping too."
seems to get better with
"seems to get better with use"
it is easy to install
"it is easy to install and does the job it is supposed to do"
Q&A
- What is the little valve / hole at the bottom of this filter for? This seems to match my Purotwist canister version but ours does not have that at the bottom.
- The port at the bottom of the membrane is for the waste water to go to the drain using a 1/4 inch tube.
Q:
What is the rated production of the Omnipure Q5672-50FC?
A:
The membrane is rated for up to 50 gallons per day under its specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Which systems does the Omnipure Q5672-50FC fit?
A:
The catalog lists Q5672-50FC, Ultra Pur, PT3000 CTA 18 GPD, PT3000 TFC 50 GPD, PT4000 TFC 50 GPD, EZ-450. Check the exact model or part number on the existing equipment before ordering Omnipure Q5672-50FC.
Q:
What size and configuration should I verify?
A:
Confirm the existing part number and the encapsulated Q-Series cartridge format before ordering. Also match the housing or twist-in head, seals, and any required flow-control components. This model includes a built-in flow restrictor and check valve; the lower port carries concentrate water to the drain through 1/4-inch tubing.
Q:
How often should this RO membrane be replaced?
A:
A common interval is about 24 months, but incoming water quality, prefilter maintenance, and water use affect service life. Test product-water TDS and replace sooner if rejection or production declines.
Q:
Does a higher GPD rating always mean better performance?
A:
No. The membrane rating must match the system design, pressure, flow restrictor, and storage configuration. Installing a different capacity can upset the permeate-to-drain balance.
Q:
What should I do after installing a new RO membrane?
A:
Confirm all seals and tubing connections, restore water slowly, check for leaks, and follow the system instructions for flushing before using the product water.
