working great water taste good
"working great water taste good"
AXEON 200361 TF-1812-100 Reverse Osmosis Membrane 100 GPD
Q&As
AXEON 200361 TF-1812-100 Reverse Osmosis Membrane 100 GPD
Q&As
Part Number:
200361
Alt Part Number:
1221122
TFM-100
200361
MC1
...
close
AXEON 100 GPD 1812 RO membrane provides high quality water for small residential RO and drinking water systems.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Description
AXEON 100 GPD TFC (Thin Film Composite) RO Membrane provides high quality water for a broad range of water chemistries. As matter collects on the membrane, water from the feed solution sweeps it away and out its own tube. The cleansed permeate, or purified water, stream continues separately from the drain stream to a storage tank or its point of use.
Specs
- Flow Rate: 100 Gallons Per Day
- Dimensions: 11.75" X 1.84"
- Replace every 24 months
Features
This Item Fits These Select Systems
Overall rating: 5.0 / 5 from 2 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
working great water taste good
"working great water taste good"
It fits. It works.
"Exactly as ordered."
Q&A
Q:
What is the rated output of the AXEON TF-1812-100 / 200361?
A:
It is rated for up to 100 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON TF-1812-100 / 200361?
A:
The catalog does not provide an approved model list for AXEON TF-1812-100 / 200361. Match the exact part number, dimensions, connection style, and equipment generation before ordering.
Q:
What should I verify before ordering?
A:
Match the exact part number and 1812 residential element, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
