The RL-210HO lamp is rated for 10,000 hours of service (about 12 months of continuous operation), and Luminor recommends replacing the quartz sleeve every 24 months. Replacing both together keeps UV output consistent and takes the guesswork out of maintenance timing. For step-by-step instructions, see our guides on how to replace a UV lamp and how to clean a UV sleeve.
Why a genuine Luminor lamp and sleeve kit matters Luminor's UV water treatment systems are tested and certified as a complete unit — lamp, chamber, and sleeve together. Genuine Luminor parts keep your system performing the way it was certified; a non-Luminor lamp or sleeve can void that certification and affect your warranty coverage if an issue comes up later.
One sleeve, two lamp lines The RQ-210 quartz sleeve is shared between this BLACKCOMB-HO kit and the standard RLQ-210 kit — both product lines use the same chamber geometry, so only the lamp differs.
Fits these Luminor BLACKCOMB-HO systems
LBH4-051
LBH5-051
LBH6-051
LBH5-051B (NSF Class B, non-monitored)
LBH6-051B (NSF Class B, non-monitored)
LBH6-051A (NSF Class A, monitored, includes UV sensor)
Specs
Includes RL-210HO and RQ-210
Replace lamp every 12 months
Replace sleeve every 24 months or as needed
Features
Includes Lamp Key (works for LUMINOR Branded Systems Only)
For all LUMINOR LBH4-051, LBH5-051, LBH6-051 UV systems
See how to replace the LUMINOR RLQ-210HO UV lamp and quartz sleeve and reset the lamp-life countdown. This genuine LUMINOR kit fits BLACKCOMB-HO High Output LBH4-051, LBH5-051, LBH6-051, LBH5-051B, LBH6-051B, LBH6-051A. The lamp is rated for 10,000 hours, and the quartz sleeve should be replaced every 24 months or sooner if scaled, cloudy, or damaged.
More product information
Q:
What is the Luminor RLQ-210HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-210HO UV lamp, RQ-210 quartz sleeve, and installation key.
Q:
Does the RLQ-210HO use a different sleeve than the standard RLQ-210 kit?
A:
No — both kits use the identical RQ-210 quartz sleeve. Only the lamp is different: this kit includes the RL-210HO, while the standard RLQ-210 kit includes the RL-210.
Q:
Is a UV bulb the same thing as the RL-210HO lamp?
A:
Yes. "UV bulb" and "UV lamp" refer to the same part — the RL-210HO is the UV lamp (sometimes called a UV bulb) included in this kit.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-210HO lamp and RQ-210 quartz sleeve are each available on their own. The RLQ-210HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
My system alarm says "Lamp Failure" — what does that mean?
A:
This alarm means the lamp isn't lit. Unplug the system for at least 3 minutes, check that the lamp connector is securely attached, then plug it back in. If the alarm persists, replace the lamp — if a new lamp doesn't resolve it, contact Luminor support for further assistance.
Luminor RLQ-210HO Lamp and Sleeve for LBH4-051, LBH5-051