Omnipure Q5505 or MCS0559 Sediment Filter 5 Micron 2.5" x 10"
Omnipure Q5505 or MCS0559 Sediment Filter 5 Micron 2.5" x 10"
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
The Q5505 sediment filter is an easy-to-install replacement filter for your under-counter RO system. The filter reduces sediment particles, including dirt and sand, up to 5 microns. This filter is used in the Outset Medical Tablo dialysis machine part number MCS0559.
- Micron Rating: 5 microns
- Dimensions: 10" X 2.875"
- Replace every 6-12 months
Q:
What does the Q5505 / MCS0559 filter reduce?
A:
It reduces dirt, sand, and other suspended particles to a nominal 5-micron level. It is a sediment stage, not a carbon filter.
Q:
How does the Q5505 / MCS0559 connect?
A:
It twists into a compatible Omnipure Q-Series head, allowing the cartridge to be changed without opening a sump housing.
Q:
What size is this cartridge?
A:
The nominal body size is 2.5 inches by 10 inches. Confirm the Q-Series part number as well as length because similar cartridges can contain different media.
Q:
Does this cartridge have a fixed gallon capacity?
A:
Omnipure states that capacity depends on incoming water quality. Replace it when flow becomes too slow or the equipment maintenance schedule calls for service.
Q:
Should a new Q5505 / MCS0559 be flushed?
A:
Yes. Install it in the correct flow direction, flush about five gallons, and check the head for leaks before normal use.
Q:
Can the Q5505 / MCS0559 replace a carbon cartridge in the same head?
A:
A cartridge may physically connect yet perform a different job. Use the part number and media specified for that stage rather than substituting based only on size.
