VIQUA PRO30 UV System 30 GPM NSF 55 Class A Certified, 650659
VIQUA PRO30 UV System 30 GPM NSF 55 Class A Certified, 650659
Description
VIQUA PRO30 Commercial UV Water Treatment System 30 GPM - 120V, 60Hz (650659)
The VIQUA Pro30 ensures safe water for your commercial applications because it is third-party certified to NSF/ANSI 55 Class A standards for up to 30 (113 lpm) at 40 mJ/cm²
NSF certification, along with several new features for convenience and safety make the VIQUA Pro30 a top-selling ultraviolet treatment system.
With a new market-leading combo flow meter and UV sensor, the Pro30 is smart and powerful. The system's amalgam lamp provides higher strength and up to 2 years of lamp life, which makes the Pro30 a system you can count on. Capable of 100-240V, 50-60Hz.
To request international electrical plug types “F” (Europe), “G” (UK), and “I” (Australia) be included with your system at no charge, please email customer support, after ordering.
- Flow Rate: 30 Gallons Per Minute
- Application: Point-of-Entry
- Power: 100-240V 50-60Hz 230W N. American Plug
- Chamber Dimensions: 41" x 4"
- Inlet Dimensions: 1" FPT and 1-1/4" MPT
- Outlet Dimensions: 1" FPT and 1-1/4" MPT
Replacements & Add Ons
Q:
What flow rate is the VIQUA PRO30 650659 designed for?
A:
It is rated for up to 30 GPM under the manufacturer’s specified conditions. Size a UV system to peak simultaneous flow, not average daily use.
Q:
What plumbing and power does it require?
A:
The system uses the PRO30 commercial connections and 120 V, 60 Hz power. Confirm pipe size, available electrical service, bypass layout, drainage, and service clearance before purchase.
Q:
What features distinguish this model?
A:
The PRO30 is NSF/ANSI 55 Class A certified and includes monitored commercial-system controls. Preserve the certified configuration and installation requirements.
Q:
Where should the VIQUA PRO30 650659 be installed?
A:
Install it indoors in the orientation permitted by the manual, after appropriate sediment filtration and other upstream treatment so water conditions stay within specifications.
Q:
What routine maintenance is required?
A:
Replace the lamp on schedule, inspect and service the quartz sleeve and seals, and maintain upstream filters. Track alarms and operating hours rather than relying on visible lamp glow.
Q:
Which service parts should I plan for?
A:
Plan for the correct amalgam lamp, quartz sleeve, seals, sensor service, and any approved valve or controller accessories specified for 650659.
