Culligan H-83 Aqua Cleer Compatible RO Filter Kit with Membrane
Culligan H-83 Aqua Cleer Compatible RO Filter Kit with Membrane
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
Filter Replacement Kit with RO Membrane for Culligan H-83 Aqua Cleer Reverse Osmosis System
High-quality compatible filter kit includes:
- STAGE 1 - 1x Sediment Pre-Filter (RS-23-SED5) - Replace Every 12 Months
- STAGE 2 - 1x Carbon Block Pre-Filter (32-175-050-100) - Replace Every 12 Months
- STAGE 3 - 1x RO Membrane TFM 36 GPD (M-T1812AC36) - Replace every 24 months
- STAGE 4 - 1x Carbon GAC Post-Filter (K2333-JJ) - Replace Every 12 Months
We offer two replacement filter kits so you can get exactly what you need — and avoid paying for filters you don’t.
-
Year 1 Kit found on this page (Includes RO Membrane):
Ideal for your first full replacement, this kit includes all filters plus the RO membrane, which typically lasts up to 24 months. -
Year 2 Kit (Without RO Membrane):
After the first year, you only need to replace the pre- and post-filters, since the RO membrane is still good for another year. This kit helps you save money while keeping your system performing like new.
*Filters may need to be replaced more often than indicated, depending on water contaminant levels and volume of water being treated.
Replacements & Add Ons
Customer Reviews
Frequently Asked Questions
Q:
Which system fits the YSM-CULH-83 filter kit?
A:
This compatible replacement kit is assembled for the Culligan Aqua-Cleer H-83 reverse osmosis system. Confirm H-83 on the system label because other Aqua-Cleer models can use different cartridges or membranes.
Q:
What parts are included in the H-83 kit?
A:
It includes an RS-23-SED5 sediment prefilter, 32-175-050-100 carbon block prefilter, M-T1812AC36 compatible 36 GPD RO membrane and K2333-JJ inline GAC postfilter.
Q:
Does this Culligan H-83 kit include a membrane?
A:
Yes. The 36 GPD compatible membrane is included. The similarly named YS-CULH-83 annual kit omits the membrane, so check for the M in YSM when comparing versions.
Q:
How often should these H-83 filters be replaced?
A:
Replace the sediment, carbon block and postfilter about every 12 months, and the RO membrane about every 24 months under typical conditions. Water quality and production changes may require earlier service.
Q:
Is YSM-CULH-83 made by Culligan?
A:
No. It is a compatible aftermarket replacement kit for supported Culligan equipment and is not manufactured or endorsed by Culligan International.
Q:
What should I do after replacing the H-83 filters and membrane?
A:
Check every housing and tubing connection for leaks, then flush and discard the initial tank fills according to the system instructions. This clears preservative, trapped air and normal carbon fines before use.
