Culligan M-T1812AC36 Compatible RO Membrane 36 GPD
Culligan M-T1812AC36 Compatible RO Membrane 36 GPD
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
The Applied Membranes M-T1812AC36 is a Culligan-Compatible RO Membrane that is compatible with several RO systems including the Culligan H-8, H-83, AC-15, and AC-30 RO systems. Alternate part numbers include ACT-36, TFM-36-A, and 1224436.
- Flow Rate: 36 Gallons Per Day
- Dimensions: 11.75" X 1.8"
- Replace every 24 months
Q:
Which RO systems fit the M-T1812AC36 membrane?
A:
The catalog-approved Fits value lists: M-T1812AC36, AC-30, H-83. Match the exact system label and part number before ordering M-T1812AC36.
Q:
How much water can this membrane produce?
A:
It is rated for up to 36 gallons per day under specified test conditions. Actual output changes with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Is this an original Culligan membrane?
A:
It is sold as a compatible replacement, not as a Culligan-branded membrane. Match the membrane format, seal position, and part number to the installed system.
Q:
Do I need to change the flow restrictor with this membrane?
A:
Use the restrictor specified for a 36 GPD membrane and the system design. A mismatched restrictor can reduce recovery, output, or membrane life.
Q:
How can I tell when the membrane needs replacement?
A:
Monitor product-water TDS, rejection rate, production rate, and refill time after confirming prefilters and feed pressure are in good condition. A common interval is about two years, but water quality and use vary.
Q:
What should I do after installation?
A:
Seat the brine seal in the correct direction, reconnect tubing, restore pressure slowly, check for leaks, and flush and discard initial product water according to the RO-system instructions.
