AXEON HF1-2514 RO Membrane 150 PSI 225 GPD 200374
AXEON HF1-2514 RO Membrane 150 PSI 225 GPD 200374
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
Genuine Axeon HF1-2514 RO membrane is 2.5 by 14 inches. The HF1 series RO membranes offer reliability, high performance, and consistent results for commercial applications. All reverse osmosis membranes are shipped dry for indefinite shelf life, are 100% vacuum integrity tested and can also be ordered as individually wet tested.
For use in the following commercial RO systems:
- RO Systems International COM150S
- RO Systems International COM-II-150S
- Replace every 24 months
- Flow Rate: 225 Gallons Per Day
- Dimensions: 14" x 2.4"
Q:
What is the rated output of the AXEON HF1-2514 / 200374?
A:
It is rated for up to 225 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-2514 / 200374?
A:
The catalog lists: HF1-2514, COM-II-150S, COM150S. Confirm the exact model and part number on your equipment before ordering AXEON HF1-2514 / 200374.
Q:
What should I verify before ordering?
A:
Match the exact part number and 2.5-by-14-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
