great new membrane
"we are getting lots of great clean water again"
AXEON HF1-4014 RO Membrane 150 PSI 600 GPD 200377
Q&As
AXEON HF1-4014 RO Membrane 150 PSI 600 GPD 200377
Q&As
Part Number:
200377
Alt Part Number:
LE-4014
ESPA1-4014
Genuine AXEON 600 GPD commercial RO membrane rated for 150 PSI, designed for dependable system output.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
SHIPS IN 3-5 BUSINESS DAYS
Description
Genuine Axeon HF1-4014 RO membrane is 4 inches by 14 inches and is used in the following commercial RO systems:
- RO Systems International COM450S
- RO Systems International COM-II-450S
AXEON's HF1 series RO membranes offer reliability, high performance, and consistent results for commercial applications. All membranes are shipped dry for indefinite shelf life, are 100% vacuum integrity tested and can also be ordered as individually wet tested.
Specs
- Replace every 24 months
- Flow Rate: 600 Gallons Per Day
- Dimensions: 14" x 3.95"
Features
This Item Fits These Select Systems
Overall rating: 4.5 / 5 from 2 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["filters"].
Review highlights
Reviews
great new membrane
"we are getting lots of great clean water again"
Good filter at a good price
"this was a good filter for a good price, direct fit and easy change out."
Q&A
Q:
What is the rated output of the AXEON HF1-4014 / 200377?
A:
It is rated for up to 600 gallons per day under specified test conditions. Actual production varies with feed pressure, temperature, dissolved-solids level, recovery, and membrane condition.
Q:
Which systems use the AXEON HF1-4014 / 200377?
A:
The catalog lists: HF1-4014, COM-II-450S, COM450S. Confirm the exact model and part number on your equipment before ordering AXEON HF1-4014 / 200377.
Q:
What should I verify before ordering?
A:
Match the exact part number and 4-by-14-inch commercial element rated at 150 psi, including element dimensions, seal arrangement, permeate connection, rated pressure, and flow-control requirements.
Q:
How do I know when the membrane needs replacement?
A:
Track normalized production and product-water TDS or conductivity. Falling output or rejection after other causes are ruled out can indicate replacement is due.
Q:
Can I substitute a different-capacity membrane?
A:
Only when the system design allows it. Capacity must match the vessel, pump pressure, recovery target, and concentrate-flow control.
Q:
What should I do after installation?
A:
Confirm seals and flow direction, restore pressure gradually, check for leaks, and follow the system instructions for flushing and discarding initial product water.
