AXEON SDF-25-2010 Sediment Filter 10 Mic 2.5" x 20" 200627
AXEON SDF-25-2010 Sediment Filter 10 Mic 2.5" x 20" 200627
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
The AXEON SDF-25-2010 sediment filter reduces dirt particles up to 10 microns in your water without the use of wetting agents, solvents, antistatic agents or binders. It is commonly used as a pre-filter in multi-stage RO systems and fits standard 20" housings.
- Micron Rating: 10 microns
- Dimensions: 20" X 2.5"
- Replace every 6-12 months
- Meets FDA requirements for food and beverage contact
Q:
What does the AXEON SDF-25-2010 / 200627 reduce?
A:
It captures sand, rust, dirt, silt, and other suspended particles down to its nominal 10-micron rating. It does not reduce dissolved minerals or provide carbon treatment.
Q:
Which housings or systems use the AXEON SDF-25-2010 / 200627?
A:
The catalog lists: SDF-25-2010, LP-350, LP-700. Confirm the exact model and part number on your equipment before ordering AXEON SDF-25-2010 / 200627. Its nominal size is 2.5-by-20-inch.
Q:
What is this sediment filter made from?
A:
The filter uses polypropylene media designed for particle filtration. Match the exact part number and construction when replacing it.
Q:
How often should it be replaced?
A:
A common interval is 6 to 12 months, but sediment load, water use, and pressure drop determine actual life. Replace it sooner if flow declines.
Q:
Can I substitute another 2.5-by-20-inch filter?
A:
Not automatically. Match the micron rating, media type, dimensions, flow requirement, and approved system fit; same-size filters can perform differently.
Q:
What should I check after replacement?
A:
Seat the cartridge and housing O-ring correctly, restore water slowly, check for leaks, and flush according to the equipment instructions.
