very good quality,good price,will buy
"very good quality,good price,will buy again"
AXEON XE1-4040 RO Membrane 2400 GPD, 100 PSI 4 x 40 Inches, 211757
Q&As
AXEON XE1-4040 RO Membrane 2400 GPD, 100 PSI 4 x 40 Inches, 211757
Q&As
Part Number:
211757
Alt Part Number:
XE1-4040
HE-4040
2400 GPD commercial brackish XE1 extra low energy TFC RO membrane, 100 PSI, NSF 61, 4x40 fit, high rejection.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Description
Genuine Axeon XE1-4040 is part of Axeon's XE1 series of high-flow reverse osmosis (RO) membranes for brackish water, offering reliability, high performance, and consistent results for commercial applications. This NSF/ANSI 61 certified membrane (model number 211757) is 4 inches by 40 inches, has a high permeate flow rate of 2500 gallons per day (GPD) and a low PSI requirement of 100 PSI.
The XE1 membrane provides extra energy savings by operating at low applied pressure with a nominal rejection rate of 99.2%. All membranes are shipped dry for indefinite shelf life, are 100% vacuum integrity tested, and can also be ordered as individually wet tested.
Specs
- Flow Rate: 2400 Gallons Per Day
- Applied Pressure: 100 PSI
- Dimensions: 40" x 4"
- Replace every 24 months or as needed
Features
Customer Reviews
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
very good quality,good price,will buy
"very good quality,good price,will buy again"
Q&A
- Where is this made?
- Axeon RO membranes with part numbers starting with "XE" or "TE" are made in China, while those beginning with "HF" or "TF" are made in the USA. So, for example, the "XE1-4040" comes from China. That said, Axeon has strict quality control for all its products, no matter where they're manufactured, and we haven't seen any drop in build quality or performance from the overseas membranes.
Frequently Asked Questions
Q:
What is the rated production of the AXEON XE1-4040 / 211757?
A:
It is rated for up to 2400 gallons per day under specified test conditions. Actual output varies with feed pressure, temperature, dissolved-solids level, and membrane condition.
Q:
Which systems does the AXEON XE1-4040 / 211757 fit?
A:
The catalog lists: XE1-4040, CT-4000, CT-5000, CT-7000, N-12000, N-16000, N-2000, N-4000, N-6000, N-8000. Confirm the exact model or part number on your equipment before ordering AXEON XE1-4040 / 211757.
Q:
What should I verify before ordering?
A:
Match the exact part number and 4-by-40-inch commercial element, including seals and the flow-control arrangement. The listing identifies a low-pressure 100 psi design; confirm the system’s required permeate rating because published production may vary by test condition.
Q:
How often should this RO membrane be replaced?
A:
A common interval is about 24 months, but source water, prefilter maintenance, and use affect service life. Test product-water TDS and replace sooner if rejection or output declines.
Q:
Can I substitute a different GPD membrane?
A:
Only if the equipment manufacturer permits it. Membrane capacity must match pressure and the flow restrictor so product and drain flow remain balanced.
Q:
What should I do after installation?
A:
Confirm seals and tubing, restore water slowly, check for leaks, and follow the system instructions for flushing and discarding initial product water.
