it works just like its
"it works just like its suppose to"
Sanitron 15-1082A UV Quartz Sleeve for S2400C System and higher
Q&As
Sanitron 15-1082A UV Quartz Sleeve for S2400C System and higher
Q&As
Part Number:
15-1082A
Alt Part Number:
15-1082A
Replacement UV quartz sleeve for Atlantic Ultraviolet Sanitron S2400B, S2400C, S5000C, S10000C, S15000C System
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
SHIPS IN 3-5 BUSINESS DAYS
Description
Replacement quartz sleeve for the Atlantic Ultraviolet Sanitron S2400B, Sanitron S2400C, Sanitron S5000C, Sanitron S10000C, Sanitron S15000C, Sanitron S20000C, and Sanitron S25000C UV systems. The quartz sleeve keeps the UV lamp from shorting out and maintains the lamp's ideal operating temperature of 104 Degrees Fahrenheit. Mineral build-up hinders the lamp's effectiveness.
Specs
- Replace every 24 months or as needed
- Open on both ends
- Length: 49.06"/1246mm
Features
This Item Fits These Select Systems
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
it works just like its
"it works just like its suppose to"
Q&A
Q:
Which systems use the Sanitron 15-1082A quartz sleeve?
A:
The catalog lists: S2400C, Sanitron S10000C, Sanitron S15000C, Sanitron S20000C, Sanitron S2400B, Sanitron S2400C, Sanitron S25000C, Sanitron S5000C. Confirm the exact model and part number on your equipment before ordering Sanitron 15-1082A quartz sleeve.
Q:
What does the Sanitron 15-1082A quartz sleeve do?
A:
The quartz sleeve isolates the UV lamp from chamber water while allowing UV energy to pass through. Large Sanitron arrays use one sleeve per lamp, so confirm the system’s total quantity before ordering.
Q:
When should the quartz sleeve be replaced?
A:
Replace it if it is cracked, chipped, clouded, etched, or cannot be restored during maintenance. Follow the equipment manual for the scheduled interval.
Q:
Can mineral deposits be removed from the sleeve?
A:
Light deposits can often be removed with the manufacturer-approved method. Replace the sleeve if clouding, etching, or deposits remain.
Q:
Should the sleeve seals be replaced too?
A:
Inspect the O-rings whenever the sleeve is serviced. Replace seals that are cut, flattened, stretched, brittle, or leaking.
Q:
What installation mistakes can damage a quartz sleeve?
A:
Forcing the sleeve, uneven retaining pressure, grit on sealing surfaces, and pinched O-rings can cause cracks or leaks. Relieve pressure and handle quartz with clean gloves.
