Sanitron S50C UV System 20 GPM 120V
Sanitron S50C UV System 20 GPM 120V
Description
The Sanitron S50C UV Unit by Atlantic Ultraviolet is part of Atlantic’s expansive Sanitron line that covers everything from residential to commercial to industrial uses. The S50C is 50” long to provide 20 gallons per minute and uses 1 lamp and sleeve. The Sanitron series features an Easy-Off end cap, a removable flanged head for easy disassembly in case of repairs with no special tools, a drain plug, a manual wiper and wiper lock to provide easy cleaning of the quartz sleeve with no disassembly required, and a sight port to allow easy visual confirmation of UV lamp operation. The Sanitron has several options such as a lamp status alarms, a safety sensor, an ultraviolet monitor, elapsed time indicator, solenoid valve, flow control, and more. The S50C is a NSF certified model.
*ADD-ON OPTIONS AVAILABLE UPON REQUEST - Contact ESP Water Products for More Info*
- Flow Rate: 20 Gallons Per Minute
- Application: Point-of-Entry
- Power: 120-230V 50-60Hz 50W N. American Plug
- Overall Dimensions: 52.375" x 5.6875"
- Inlet Dimensions: 1-1/2" NPT
- Outlet Dimensions: 1-1/2" NPT
Replacements & Add Ons
Helpful Info & Downloads
Q:
What flow rate is the Sanitron S50C designed for?
A:
It is rated for up to 20 GPM under the manufacturer’s specified conditions. Size a UV system to peak simultaneous flow, not average daily use.
Q:
What plumbing and power does it require?
A:
The system uses the flanged or threaded connections specified for the selected configuration and 120-volt power. Confirm pipe size, available electrical service, bypass layout, drainage, and service clearance before purchase.
Q:
What features distinguish this model?
A:
This stainless-steel Sanitron configuration uses 1 UV lamp and quartz sleeve, a long single-chamber design, plus a manual wiper system intended to simplify sleeve maintenance.
Q:
Where should the Sanitron S50C be installed?
A:
Install it indoors in the orientation permitted by the manual, after appropriate sediment filtration and other upstream treatment so water conditions stay within specifications.
Q:
What routine maintenance is required?
A:
Replace the lamp on schedule, inspect and service the quartz sleeve and seals, and maintain upstream filters. Track alarms and operating hours rather than relying on visible lamp glow.
Q:
Which service parts should I plan for?
A:
Plan for the matching lamp, quartz sleeve, sleeve seals, and any wiper components. Confirm quantities and voltage-specific electrical parts for this exact model.
