VIQUA 602731 UV Quartz Sleeve for B, B4, B4-V UV Systems
VIQUA 602731 UV Quartz Sleeve for B, B4, B4-V UV Systems
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
Replacement sleeve for obsolete VIQUA UVMAX B4 Model systems. The quartz sleeve keeps the UV lamp from shorting out and maintains the lamp's ideal operating temperature of 104 Degrees Fahrenheit. Mineral build-up hinders the lamp's effectiveness.
- Replace every 24 months or as needed
Q:
Which systems use the VIQUA 602731 quartz sleeve?
A:
The catalog lists: B4, B4-V, UVMax B4. Confirm the exact model and part number on your equipment before ordering VIQUA 602731 quartz sleeve.
Q:
What does the VIQUA 602731 quartz sleeve do?
A:
The quartz sleeve isolates the UV lamp from chamber water while allowing UV energy to pass through.
Q:
When should the quartz sleeve be replaced?
A:
Replace it if it is cracked, chipped, clouded, etched, or cannot be restored during maintenance. Follow the equipment manual for the scheduled interval.
Q:
Can mineral deposits be removed from the sleeve?
A:
Light deposits can often be removed with the manufacturer-approved method. Replace the sleeve if clouding, etching, or deposits remain.
Q:
Should the sleeve seals be replaced too?
A:
Inspect the O-rings whenever the sleeve is serviced. Replace seals that are cut, flattened, stretched, brittle, or leaking.
Q:
What installation mistakes can damage a quartz sleeve?
A:
Forcing the sleeve, uneven retaining pressure, grit on sealing surfaces, and pinched O-rings can cause cracks or leaks. Relieve pressure and handle quartz with clean gloves.
